Quick Guide
9
To check the current IP address or modify a new IP address for the Managed
Switch,pleaseusetheprocedureasfollows:
Show the current IP address
1. On “Switch#”prompt,enter“show ip interface vlan 1”.
2.The screen displays the current IP address, subnet mask and gatewayas shown
inFigure4-5.
Figure 4-5: Showing IP Information Screen
If the IP is successfully congured, the Managed Switch will apply the new IP
address setting immediately. You can access the Web interface of Managed Switch
throughthenewIPaddress.
Note
If you are not familiar with console command or the related
parameter, enter “?” anytime in console to get the help descrip-
tion.