Quick Guide

14
6.RecoveringBacktoDefaultConguration
To reset the IP address to the default VLAN 1 interface IP address
“192.168.0.100”, default Management Port IP address “192.168.1.1” or reset
the login password to default value, press the hardware-based reset button on
the rear panel for about 10 seconds. After the device is rebooted, you can log
in the management Web interface within the same subnet of 192.168.0.xx or
192.168.1.xx.
Reset
26
25
28
27
SYS
PWR
26 27/Stacking Up 28/Stacking Down
MGMT
Console, 115200
Reset Button
Figure 6-1: SGS-5240-24T4X/SGS-5240-24P4X Reset Button
Reset
SYS
PWR
MGMT
25 26 27/Stacking Up 28/Stacking Down
22 23 24
Console, 115200
Reset Button
Figure 6-2: SGS-5240-20S4C4XR Reset Button