User's Manual

User’s Manual of SGS-5240 Series Managed Switch
246
4.8.1.3 View Configuration
Device Management > SNMP > View Configuration page is used to configureSNMPv3 views which are used to restrict user
access to specified portions of the MIB tree. The predefined view “defaultview” includes access to theentire MIB tree.
Add View
 View Name – The name of the SNMP view. (Range: 1-64 characters)
 OID Subtree – Specifies the initial object identifier of a branch within the MIB tree. Wild cards can be used to mask a
specific portion of the OID string. Use the Add OID Subtree page to configure additional object identifiers.
 Type – Indicates if the object identifier of a branch within the MIB tree is included or excluded from the SNMP view. Add
OID Subtree
 View Name – Lists the SNMP views configured in the Add View page.
 OID Subtree – Adds an additional object identifier of a branch within the MIB tree to the selected View. Wild cards can be
used to mask a specific portion of the OID string.
 Type – Indicates if the object identifier of a branch within the MIB tree is included or excluded from the SNMP view.
4.8.1.4 Group Configuration
Device Management > SNMP > Group Configuration page is used to add an SNMPv3 group which can be used to set the
access policy for its assigned users, restricting them to specific read, write, and notify views. You can use the pre-defined
default groups or create new groups to map a set of SNMP users to SNMP views.
◆Group Name – The name of the SNMP group to which the user is assigned. (Range: 1-32 characters)
◆Security Model – The user security model; SNMP v1, v2c or v3.