SGS-5220 Series User Manual

Table Of Contents
Users Manual of SGS-5220 Series
320
Allocation mode
In this mode the user allocates the amount of power that each port may reserve. The allocated/reserved power for each
port/PD is specified in the Maximum Power fields. The ports are shut down when total reserved powered exceeds the
amount of power that the power supply can deliver.
In this mode the port power will not be turned on if the PD requests more available power.
LLDP mode
In this mode the ports of PoE power are managed and determined by LLDP Media Protocol.
4.16.3 Power Over Ethernet Configuration
This section allows the user to inspect and configure the current PoE configuration settings, as Figure 4-16-2 appears.
Figure 4-16-2: PoE Configuration Screenshot
The page includes the following fields:
Object Description
System PoE Admin
Mode
Allows user to enable or disable PoE function. It will causes all of PoE ports to
supply or not supply power.
PoE Temperature
Protection
Allows user to enable or disable PoE Temperature Protection.
PoE Management
Mode
There are Six modes for configuring how the ports/PDs may reserve power and
when to shut down ports.
Class-Consumption mode: System offers PoE power according to PD real
power consumption.