SGS-5220 Series User Manual

Table Of Contents
Users Manual of SGS-5220 Series
196
Classify
Click to enable Classification at Ingress side.
Egress
There are the following configurable parameters for Egress side
Remap DP0 Controls the remapping for frames with DP level 0.
Remap DP1 Controls the remapping for frames with DP level 1.
Remap DP
Select the DSCP value from select menu to which you want to remap. DSCP
value ranges form 0 to 63.
Remap DP1
Select the DSCP value from select menu to which you want to remap. DSCP
value ranges form 0 to 63.
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
4.9.10 DSCP Classification
This page allows you to map DSCP value to a QoS Class and DPL value. The DSCP Classification screen in Figure 4-9-11
appears.
Figure 4-9-11: DSCP Classification page Screenshot
The page includes the following fields:
Object Description
QoS Class
Available QoS Class value ranges from 0 to 7. QoS Class (0-7) can be mapped