SGS-5220 Series Quick Guide
6
4. Logon to Console
Once the terminal is connected to the device, power on the Stackable Managed
Switch, and the terminal will display “running testing procedures”. Then, the
following message asks to log-in user name and password. The factory default
user name and password are shown as follows and the login screen in Figure 4-1
appears.(exampleonModel:24T)
Username:admin
Password:admin
Figure 4-1: Stackable Managed Switch Console Login Screen
The user can now enter commands to manage the Managed Switch. For a detailed
descriptionofthecommands,pleaserefertothefollowingchapters.
Note
1.For security reason, please change and memorize the new pass-
wordafterthisfirstsetup.
2.Onlyacceptcommandinlowercaseletterunderconsoleinterface.