SGS-5220 Series Quick Guide

5
3. Terminal Setup
Tocongurethesystem,connectaserialcabletoaCOM port on a PC or notebook
computerandtoRJ45typeofserialportoftheStackableManagedSwitch.
Managed Switch
PC / Workstation
with
Terminal Emulation Software
Serial Port
Serial Port
115200,8,n,1
RS232 to RJ45 Cable
Figure 3-1 Stackable Managed Switch Console Connectivity
A terminal program is required to make the software connection to the Managed
Switch.
1. Run terminal program on the OS.
2.When the following screen appears, make sure that the COM port should be
conguredas:
Baud :115200
Databits :8
Parity :None
Stopbits :1
Flowcontrol :None
Figure 3-2COMPortConguration