Datasheet

SGS-5220-24P2X
4
Cost-effective 10Gbps Uplink Capacity
10G Ethernet is a big leap in the evolution of Ethernet. The two 10G SFP+ slots of
the SGS-5220-24P2X support Dual-speed, 10GBASE-SR/LR or 1000BASE-SX/LX,
meaning the administrator now can flexibly choose the suitable SFP/SFP+ transceiver
accordingtothetransmissiondistanceorthetransmissionspeedrequiredtoextend
the network efficiently. They greatly support SMB network to achieve 10Gbps high
performance in a cost-effective way because 10GbE interface usually could be available
in Layer 3 Switch but Layer 3 Switch could be too expensive to SMBs.
Solution for IPv6 Networking
With the support for IPv6 / IPv4 protocol, and easy and friendly management interfaces,
theSGS-5220seriesisthebestchoiceforIPsurveillance,VoIPandwirelessservice
providers to connect with the IPv6 network. It also helps the SMB to step in the IPv6 era
with the lowest investment but not necessary to replace the network facilities while the
ISP constructs the IPv6 FTTx edge network.
IPv4 and IPv6 VLAN Routing for Secure and Flexible Management
To help customers stay on top of their businesses, the SGS-5220 switch series not only
provides ultra high transmission performance and excellent layer 2 technologies, but also
offersIPv4/IPv6VLANroutingfeaturewhichallowstocrossoverdifferentVLANsand
differentIPaddressesforthepurposeofhavingahighlysecured,exiblemanagement
and simpler networking application.
Robust Layer2 Features
The SGS-5220 series can be programmed for advanced switch management function,
such as dynamic port link aggregation, Q-in-Q VLAN, Multiple Spanning Tree
Protocol(MSTP), Layer 2/4 QoS, bandwidth control and IGMP/MLD snooping. The
SGS-5220 series allows the operation of a high-speed trunk combining multiple ports.
Supporting 14 trunk groups, it enables a maximum of up to 8 ports per trunk and
supports connection fail-over as well.
Powerful Security
The SGS-5220 series offers comprehensive layer2 to layer4 access control list
(ACL) for enforcing security to the edge. It can be used to restrict network access by
denying packets based on source and destination IP address, TCP/UDP port number
ordenedtypicalnetworkapplications.Itsprotectionmechanismalsocomprises802.1x
Port-based and MAC-based user and device authentication. With the private VLAN
function, communication between edge ports can be prevented to ensure user privacy.
–
Firmware upload/download via HTTP / TFTP
–
Reset button for system reboot or reset to factory default
–
Dual Images
• DHCP Relay
• DHCP Option82
• User Privilege levels control
• NTP (Network Time Protocol)
• Link Layer Discovery Protocol (LLDP) and LLDP-MED
• Network Diagnostic
–
ICMPv6 / ICMPv4 Remote Ping
–
Cable Diagnostic technology provides the mechanism to
detect and report potential cabling issues
• SMTP / Syslog remote alarm
• Four RMON groups (history, statistics, alarms and events)
• SNMPtrapforinterfaceLinkUpandLinkDownnotication
• System Log
• PLANET Smart Discovery Utility for deploy management
IPv4 Network
IPv6 Network
Application
IPv6
Stack
IPv4
Stack
Transport Layer
TELNET WEB
SSHSNMP
ICMPSSL
DHCPNTP
SGS-5220-24P2X
IPv6 Management HostIPv4 Management Host