Datasheet

SGS-5220-24P2X
1
High-density, Resilient Deployment Switch Solution for Gigabit Networking
of Enterprise, Campus and Data Center
For the growing Gigabit network and IoT (Internet of Things) demand, PLANET has
launched a new-generation Stackable Gigabit Switch solution, the SGS-5220 switch
series, to meet the needs of enterprises, telecoms and campuses for a large-scale
network deployment. The SGS-5220-24P2X is Layer 2+ Stackable Managed Gigabit
Switch, which supports both IPv4 and IPv6 protocols and hardware Layer 3 static
routing capability, and provides 24 10/100/1000Mbps 802.3at PoE+ ports, 4 shared
Gigabit SFP slots, 2 10G SFP+ uplink slots and another 2 dedicated 10G SFP+
stacked interfaces for stacking with the series of switches. Up to 16 units, 384 Gigabit
Ethernet PoE+ ports and 32 10Gbps SFP+ slots can be managed by a stacking group
and you can add ports and functionality as needed.
Efficient Single IP Management
The SGS-5220 stackable series applies the advantage of the stacking technology to
managing the stack group with one single IP address, which helps network managers to
easily manage a stack of switches instead of connecting and setting each unit one by
one. The stacking technology also enables the chassis-based switches to be integrated
into the SGS-5220 Stackable Managed Switch series at an inexpensive cost.
L2+ 24-Port 10/100/1000T 802.3at PoE + 2-Port
10G SFP+ Stackable Managed Switch
Physical Port
• 24-Port 10/100/1000BASE-T RJ45 copper with IEEE
802.3at / 802.3af Power over Ethernet Injector function
• 4 100/1000BASE-X mini-GBIC/SFP slots, shared with Port-
21 to Port-24 compatible with 100BASE-FX SFP
• 2 10GBASE-SR/LR SFP+ slots, compatible with
1000BASE-SX/LX/BX SFP
• 2 10GBASE-SR/LR SFP+ stackable slots
• RJ45 console interface for basic management and setup
Stacking Features
• Physical stacking up to 16 units, 384 Gigabit ports, 32 10
Gigabit ports
• Single IP address stack management
• Stacking architecture supports Chain and Ring mode
• Plug and Play connectivity
• Mirror across stack
• Link Aggregation groups spanning multiple switches in a
stack
• Physical MAC address learning with MAC table
synchronization across stack
Power over Ethernet
• Complies with IEEE 802.3at High Power over Ethernet
end-span PSE
• Complies with IEEE 802.3af Power over Ethernet end-span
PSE
• Up to 24 ports of IEEE 802.3af / 802.3at devices powered
• Supports PoE Power up to 30.8 watts for each PoE port
• Auto detects powered device (PD)
• Circuit protection prevents power interference between
ports
• Remote power feeding up to 100 meters
• PoE Management
–
Total PoE power budget control
–
Per port PoE function enable/disable
–
PoE Port Power feeding priority
–
Per PoE port power limitation
–
PDclassicationdetection
–
PD alive-check
–
PoE schedule
–
PD power recycling schedule
RJ45 Type Console 4 x Gigabit TP/SFP Combo Port 2 x 10G Stacked SFP+
24 x Gigabit 802.3at PoE Port 2 x 1/10G SFP+ Port