User's Manual
Table Of Contents
User’s Manual of QSFP-100G-SR4/QSFP-100G-LR4
- 5 -
Figure 1: Inserting the QSFP28 Ethernet Transceiver Module
2. After the Fiber connection is done successfully, check the LEDs to verify whether there is
a link and a proper connection at the port.
Please refer to the user’s manual for more about the Switch or module’s management.
4-2 Removing the QSFP28 Ethernet Transceiver Module
1. Make sure there is no network activity by consulting or checking with the network adminis-
trator.
2. Remove the Fiber Optic Cable gently.
3. Turn the handle or pull out the tab of the QSFP28 Ethernet Transceiver module gently.