PWR-Series User Manual

- 1 - - 2 - - 3 - - 4 -
DC Single Output Industrial
DIN Rail Power Supply
PWR-40-24/PWR-60-24
PWR-75-24/PWR-75-48/
PWR-120-48/PWR-240-48/PWR-480-48
User's Manual
1. Package Contents
Thanks for purchasing DC Single Output Industrial DIN Rail
Power Supply units from PLANET technology; the DC Single
Output Industrial DIN Rail Power Supply units can transform AC
power into DC power output for PLANET Industrial equipment.
The following models come with the DC Single Output Industrial
DIN Rail Power Supply units:
l PWR-40-24 (MEAN WELL MDR-40-24): 40W 24V DC
Single Output Industrial DIN Rail Power Supply
(-20 ~ 70 degrees C)
l PWR-60-24 (MEAN WELL MDR-60-24): 60W 24V DC
Single Output Industrial DIN Rail Power Supply
(-20 ~ 70 degrees C)
l PWR-75-24 (MEAN WELL DR-75-24): 75W 24V DC Single
Output Industrial DIN Rail Power Supply (-10 ~
60 degrees C)
l PWR-75-48 (MEAN WELL NDR-75-48): 75W 48V DC
Single Output Industrial DIN Rail Power Supply
(-20 ~ 70 degrees C)
l PWR-120-48v2 (MEAN WELL NDR-120-48): 120W 48V
DC Single Output Industrial DIN Rail Power
Supply (-20 ~ 70 degrees C)
2. Requirements
The DC Single Output Industrial DIN Rail Power Supply units
are designed for providing DC power to PLANET Industrial
equipment. For AC power input and DC power output from
DC Single Output Industrial DIN Rail Power Supply units, the
following equipment is necessary for further installation.
l AC Power Cord Cable x 1
l Terminal Block Connector within Two DC Power Inputs Wires
l Cutting Tools: Long Nose Pliers and Pen Knife
Note
1. Before working on the device, please make
sure power cord has been unplugged from
power outlet.
2. PLANET DIN-Rail power supply series is for
indoor use only.
3. PLANET DIN-Rail power supply series must be
earthed.
3. AC Power Cord Installation
The DC Single Output Industrial DIN Rail Power Supply unit
power requirement is 100-240V AC, 50/60Hz with power input
lines. Suggest you use a standard AC power cord.
Step 1: Use pen knife to cut open the AC power cord.
Step 2: Open the AC power cord and there are 3 wires inside.
Step 4: Make sure the wires are neatly straightened.
Step 5: Please verify the 3 wires, which are live wire, null wire
and earth wire.
Note
For the standard AC power cord, live wire is
black, null wire is white and earth wire is green.
Please verify these 3 wires from your AC power
cord before starting the following procedure.
Live wire
Black color
Null wire
White color
Earth wire
Green color
Wiring the AC Power Input:
: Earth wire.
: Null wire.
: Live wire.
Note
1. Please do not connect the power plug of the
power cable to a standard wall outlet during
this installation.
2. The example is based on PWR-40-24 for
PWR-60-24, PWR-75-24, PWR-75-48, PWR-
120-48v2, PWR-240-48v2 and PWR-480-48v2.
The indication is the same, but on a different
location.
Step 7: Please connect the power plug of the power cable to a
standard wall outlet to power on the DC Single Output
Industrial DIN Rail Power Supply units.
When the DC Single Output Industrial DIN Rail Power Supply
units receive power, the “DC OK” LED should remain solid
Green.
Figure 2. "DC OK" LED of DC Single Output Industrial DIN Rail Power
Supply units.
l PWR-240-48v2 (MEAN WELL NDR-240-48): 240W 48V
DC Single Output Industrial DIN Rail Power
Supply (-20 ~ 70 degrees C)
l PWR-480-48v2 (MEAN WELL NDR-480-48): 480W 48V
DC Single Output Industrial DIN Rail Power
Supply (-20 ~ 70 degrees C)
Note
Strongly recommend to use the 24V DC Single
Output Industrial DIN Rail Power Supply units for
Industrial non-PoE equipment and the 48V DC
Single Output Industrial DIN Rail Power Supply
units for Industrial PoE equipment.
The box should contain the following items:
l The DC Single Output Industrial DIN Rail Power Supply Unit
x 1
l This User’s Manual x 1
If any item is found missing or damaged, please contact your
local reseller for replacement.
Step 3: Use a long nose plier to remove the jackets of the 3
wires.
Step 6: Please connect the live wire, null wire and earth wire
to the corresponding location.
Figure 1. Connecting the 3 wires to the corresponding location.
Note
1. The example is based on PWR-40-24 for
PWR-60-24, PWR-75-24, PWR-75-48, PWR-
120-48v2, PWR-240-48v2 and PWR-480-48v2.
The DC OK indication is the same, but on a
different location.
2. As +V ADJ is for O/P voltage adjust-
ment, the range is shown as PWR-40-24/
PWR-60-24: 24V to 30V. PWR-75-24/
PWR-75-48: 24V to 28V. PWR-120-48v2/
PWR-240-48v2/PWR-480-48v2: 48V to 55V.
Adjustable with screwdriver and voltage
measure with multimeter.