Datasheet

ManualsBrandsPLANET Technology ManualsPoE Extender1-Port 802.3bt PoE++ to 4-Port 802.3af/at Gigabit PoE Extender

POE-E304

PoE Solution for Breaking RJ45 100m Limitation

PLANET POE-E304 is a 1-port 95W 802.3bt PoE++ to 4-port 802.3af/at Gigabit PoE

Extender designed especially for point to multipoint PoE applications. The POE-E304

can obtain a maximum of 95-watt PoE power from IEEE 802.3bt PoE input port

and supplies a maximum of 65-watt PoE power budget to four PoE output ports,

extending the simultaneous transmission distance of both the Gigabit Ethernet Data

and IEEE 802.3at/802.3af Power over Ethernet over the standard 100m (328 ft.)

Cat. 5/5e/6 UTP cable to up to 200 meters. Thus, the POE-E304 provides a simple

solution for adding PoE ports without running more cabling and achieves more

exible network applications without requiring an external power adapter.

Physical Port

• 5 10/100/1000BASE-T Gigabit RJ45 ports

– 1-port data + power input

– 4-port data + power output

Power over Ethernet

• 1-port data + power input

– Complies with IEEE 802.3bt PoE++ PD

– Supports PoE input power up to 95 watts

• 4-port data + power output

– Complies with IEEE 802.3af/IEEE 802.3at PoE+/end-

span PSE

– Up to 4 IEEE 802.3af/802.3at devices powered

– Supports PoE power up to 32 watts for each PoE port

– Auto detects powered device (PD)

• Extends the range of PoE to an additional 100 meters

(328ft.)

• Forwards both Ethernet data and PoE power to remote

device

Layer 2 Features

• Hardware-based 10/100/1000Mbps auto-negotiation and

auto MDI/MDI-X

• Integrates address look-up engine, supporting 2K absolute

MAC addresses

• 9K jumbo packet support

• Features Store-and-Forward mode with wire-speed ltering

and forwarding rates

• IEEE 802.3x ow control for full duplex operation and

backpressure for half duplex operation

• Automatic address learning and address aging

Case and Installation

• No external power cable installation required

• Made of metal, desktop size design

• Wall-mountable, Plug-and-Play installation

• 0 ~ 50 degrees C operating temperature

1-Port 802.3bt PoE++ to 4-Port 802.3af/at Gigabit PoE Extender

Plug and Play Installation

The POE-E304 is quite easy to be installed by simple Plug and Play. It is used

between a power source equipment (PSE) and a powered device (PD). The

POE-E304 injects power to the PD without affecting the data transmission

performance. The POE-E304 offers a cost-effective and quick solution to doubling

the standard range of PoE from 100 to 200 meters. The POE-304 is designed in a

compact box containing five RJ45 ports, of which one "PoE IN" port functions as

PoE (Data and Power) input and the other four "PoE OUT" ports function as PoE

output. The "PoE OUT" port is also the power injector that transmits DC voltage

over the Cat5/5e/6 cable and transfers data and power simultaneously between the

PSE and PD.

Summary of content (4 pages)

PAGE 1
POE-E304 1-Port 802.3bt PoE++ to 4-Port 802.3af/at Gigabit PoE Extender Physical Port • 5 10/100/1000BASE-T Gigabit RJ45 ports –– 1-port data + power input –– 4-port data + power output Power over Ethernet • 1-port data + power input –– Complies with IEEE 802.3bt PoE++ PD PoE Solution for Breaking RJ45 100m Limitation PLANET POE-E304 is a 1-port 95W 802.3bt PoE++ to 4-port 802.3af/at Gigabit PoE Extender designed especially for point to multipoint PoE applications.
PAGE 2
POE-E304 1 In 2 Out 1 In 4 Out Power Power Data Data 802.3bt PoE++ (95W) 802.3bt PoE++ (95W) IEEE 802.3af (12W) IEEE 802.3af (12W) IEEE 802.3af (12W) IEEE 802.3af (12W) IEEE 802.3at (25W) IEEE 802.3at (25W) PoE Dome IP Camera PoE PTZ IP Camera Applications One Power Sourcing for Multiple Powered Devices Is 100-meter cable long enough for a wide range of IP surveillance network deployments? The answer is certainly not.
PAGE 3
POE-E304 Three-view Diagram 50-56V 168 32 94 1 2 3 4 PWR 5 PoE-in-Use 10/100/1000 LNK ACT POE-E304 PoE Out PoE In 122 Product Specifications Model POE-E304 Hardware Specifications Network Connector PoE In Port 1 x 10/100/1000BASE-T Ethernet with IEEE 802.3bt PoE++ “Data + DC” in, auto MDI/MDI-X, auto-negotiation RJ45 connector PoE Out Port 4 x 10/100/1000BASE-T Ethernet with IEEE 802.3af/802.
PAGE 4
POE-E304 Enclosure Metal Installation Desktop/Wall mountable Dimensions (W x D x H) 168 x 93 x 32 mm Weight 403g Power Requirements PoE In: IEEE 802.3bt or 4-pair 802.3at PoE+ compliant with voltage within 50V-56V DC External DC: 50~56V DC Power Consumption 0.9 watts/3.1BTU (System on) 74 watts/252.