Datasheet

POE-E202
1
1-port 802.3at PoE+ to 2-port 802.3af/at Gigabit PoE Extender
Physical Port
• 3-port10/100/1000BASE-T Gigabit RJ45
• 1-port data+powerinput
• 2-port data+poweroutput
Power over Ethernet
• 1-port data + power input
– Complies with IEEE 802.3at Power over Ethernet Plus
end-span/mid-span PD
– Supports PoE input power up to 30.8 watts
• 2-port data + power output
– Complies with IEEE 802.3af/IEEE 802.3at Power over
Ethernet end-span PSE
– Up to 2 IEEE 802.3af/802.3at devices powered
– Supports PoE power up to 25 watts for each PoE port
– Auto detects powered device (PD)
• Extends the range of PoE to an additional 100 meters (328ft.)
• Forwards both Ethernet data and PoE power to remote
device
Layer 2 Features
• Hardware-based 10/100/1000Mbps auto-negotiation and auto
MDI/MDI-X
• Integrates address look-up engine, supporting 2K absolute
MAC addresses
• 10K iumbo packet support
• IEEE 802.1Q VLAN transparency
• FeaturesStore-and-Forwardmodewithwire-speedltering
and forwarding rates
• IEEE802.3xowcontrolforfullduplexoperationandback
pressure for half duplex operation
• Automatic address learning and address aging
• Supports CSMA/CD protocol
Case and Installation
• No external power cable installation required
• Made of metal, desktop size design
• Wall-mountable, Plug-and-Play installation
• 0 ~ 50 degrees C operating temperature
PoE Solution for Breaking RJ45 100m Limitation
PLANET POE-E202 is a 1-port PoE+ to 2-port 802.3af/at Gigabit PoE Extender
designed especially for point to multipoint PoE application. The POE-E202 can
obtain a maximum of 30-watt PoE power from PoE+ input port and supplies a
maximum of 25-watt PoE power budget for two PoE output ports, extending both
the GigabitEthernetData and IEEE802.3at/802.3afPoweroverEthernet over
the standard 100m (328 ft.) Cat. 5/5e/6 UTP cable to up to two 200m powered
devices at the same time.The POE-E202 provides a simple solution for adding PoE
portswithoutrunningmorecablingandachievesmoreexiblenetworkapplications
without requiring an external power adapter.
Plug and Play Installation
The POE-E202 is quite easy to be installed by simple plug and play. It is used
between a power source equipment (PSE) and a powered device (PD). The
POE-E202 injects power to the PD without affecting the data transmission
performance. The POE-E202 offers a cost-effective and quick solution to doubling
the standard range of PoE from 100 to 200 meters. The POE-E202 is designed in a
compact box containing three RJ45 ports, of which one "PoEIN" port functions as
PoE(DataandPower)inputand the other two"PoEOUT" ports function as PoE
output. The "PoEOUT" port is also the power injector that transmits DC voltage
over the Cat5/5e/6 cable and transfers data and power simultaneously between the
PSE and PD.
PoE Dome IP Camera
PoE+
(
30W
)
IEEE 802.3af
(
12W
)
Power
Data
100m
100m
IEEE 802.3af
(
12W
)
100m
PoE PTZ IP Camera
PoE+
(
30W
)
IEEE 802.3at
(
25W
)
25W
12W+12W
Power
Data
100m
PoE+ Injector/Switch
802.3at PoE+ Extender
PoE+ Injector/Switch
100m
1 In 1 Out
802.3at PoE+ Extender
1 In 2 Out