Datasheet

POE-E202
1
1-Port 802.3at PoE+ to 2-Port 802.3af/at Gigabit
PoE Extender
PoE Solution for Breaking RJ45 100m Limitation
PLANET POE-E202 is a 1-port PoE+ to 2-port 802.3af/at Gigabit PoE Extender
designed especially for point to multipoint PoE application. The POE-E202 can obtain a
maximum of 30-watt PoE power from PoE+ input port and supplies a maximum of 25-
watt PoE power budget for two PoE output ports, extending both the Gigabit Ethernet
Data and IEEE 802.3at/802.3af Power over Ethernet over the standard 100m (328 ft.)
Cat. 5/5e/6 UTP cable to up to two 200m powered devices at the same time.
The POE-E202 provides a simple solution for adding PoE ports without running more
cabling and achieves more flexible network applications without requiring an external
power adapter.
Physical Port
• 3-port 10/100/1000BASE-T Gigabit RJ45 interface
–
1-port data + power input
–
2-port data + power output
Power over Ethernet
• 1-port data + power input
–
Complies with IEEE 802.3at Power over Ethernet Plus
end-span/mid-span PD
–
Supports PoE input power up to 30.8 watts
• 2-port data + power output
–
Complies with IEEE 802.3af/IEEE 802.3at Power over
Ethernet end-span PSE
–
Up to 2 IEEE 802.3af/802.3at devices powered
–
Supports PoE power up to 25 watts for each PoE port
–
Auto detects powered device (PD)
• Extends the range of PoE to an additional 100 meters (328ft.)
• Forwards both Ethernet data and PoE power to remote device
Layer 2 Features
• Hardware based 10/100/1000Mbps auto-negotiation and auto
MDI/MDI-X
• Integrates address look-up engine, supporting 2K absolute MAC
addresses
• 10K iumbo packet support
• IEEE 802.1Q VLAN transparency
• FeaturesStore-and-Forwardmodewithwire-speedlteringand
forwarding rates
• IEEE802.3xowcontrolforfullduplexoperationand
backpressure for half duplex operation
• Automatic address learning and address aging
• Supports CSMA/CD protocol
Case and Installation
• No external power cable installation required
• Made of metal, desktop size design
• Wall-mountable, Plug-and-Play installation
• 0 ~ 50 degrees C operating temperature
PoE Dome IP Camera
PoE+
(
30W
)
IEEE 802.3af
(
12W
)
Power
Data
100m
100m
IEEE 802.3af
(
12W
)
100m
PoE PTZ IP Camera
PoE+
(
30W
)
IEEE 802.3at
(
25W
)
25W
12W+12W
Power
Data
100m
PoE Injector/Switch
802.3at PoE Extender
802.3at PoE Extender
PoE Injector/Switch
100m
1 In 1 Out
1 In 2 Out