User's Manual

ManualsBrandsPLANET Technology ManualsPoE ExtenderIEEE 802.3at Power over Gigabit Ethernet Extender

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Package Contents

Thank you for purchasing PLANET IEEE 802.3at PoE+ Extender,

POE-E201.

Open the box of the PoE+ Extender and carefully unpack it. The

box should contain the following items:

IEEE 802.3at PoE+ Extender x 1 User's Manual x 1

If any of these are missing or damaged, please contact your dealer

immediately; if possible, retain the carton including the original

packing material for future use in case there is a need to return it

to us for repair.

3. Hardware Introduction

3.1 Product Outlook

70.30

94.00

26.20

Ethernet+DC

10/100/1000BASE-T

OUT

10/100/1000BASE-T

IEEE 802.3at

Power over Gigabit Ethernet Extender

PoE OUT

LNK/ACT

PoE IN

OUT IN

Unit: mm

3.2 Ports Connection

Port

Connect the PoE IN port of the POE-E201 to any of the

following 802.3af/802.3at/802.3bt PSE devices like in this

case a PoE injector through a CAT-5/5e/6 UTP cable:

 PoE injector

 PoE Injector hub

 PoE Ethernet switch

4.3 Connecting POE-E201 to the Powered Device

(PD)

Step 3: Connect the additional Cat.5/5e/6 cable from the “OUT”

port of the POE-E201 to a remote PoE PD.

Step 4: The "OUT" port is a power injector that transmits data

and power simultaneously between the PSE and PD.

Step 5: Once the POE-E201 detects an IEEE 802.3at/802.3af PoE

PD device, the “PoE OUT” LED indicator will light up in

amber to show it is providing power.

PoE

Power

Data

100M

PoE

1000BASE-T UTP with PoE

PoE IP Camera

POE-E201

802.3at PoE+ Extender

Note

1. If the connected device does not fully comply with

the IEEE 802.3at/802.3af standard or in-line power

device, the PoE OUT LED indicator of the POE-E201

will not be turned on.

2. According to the IEEE 802.3at/802.3af standard,

the POE-E201 will not inject power if the PD is not

the said standard.

4. Hardware Installation

This section describes the hardware features of the POE-E201.

Before connecting any network device to the POE-E201, read this

chapter carefully.

4.1 Before Installation

Before your installation, it is recommended to check your network

environment. If there are any far-away IEEE 802.3at/802.3af

devices that need to be powered on, the POE-E201 can provide you

with a way to supply power to this Ethernet device conveniently.

The POE-E201 is installed between the PSE (power source

equipment) and the PD (powered device); it is powered by PSE

and forwards the Ethernet data and remaining POE power to the

PD. The POE-E201 doesn’t require an external power supply and

it can be installed easily by means of plug and play, meaning the

operator does not need to congure the POE-E201. The POE-E201

injects power to the PDs without aecting the data transmission

performance. It oers a cost-eective and quick solution to extend

power and data by an additional 100 meters.

Note

1. To provide you with a better PoE power and data

extension quality, we strongly recommend you

to use “Solid UTP Cable” when installing the

POE-E201.

2. The POE-E201 can be installed with a third-party

device if the device is compliant with the IEEE

802.3at/802.3af standard.

2. Product Features

 Compliant with IEEE 802.3at Power over Ethernet Plus PSE and

PD standard

 Backward compatible with IEEE 802.3af PoE

 Complies with IEEE 802.3/802.3u/802.3ab 10/100/1000BASE-T

 Extends the range of PoE by an additional 100 meters (328ft.)

 Automatically detects and protects PoE equipment from being

damaged by incorrect installation

 Multiple units allowed with daisy-chain installation support

 Forwards both Ethernet data and PoE power to remote device

 No external power cable installation required

 Compact size, wall-mountable design

 Plug-and-Play installation

OUT

Port

Connect the PoE OUT port of the POE-E201 to the any of

the following 802.3af/802.3at PD devices or connect to the

other POE-E201 unit through a CAT-5/5e/6 UTP cable:

 PoE IP camera

 PoE VoIP phone

 PoE wireless AP

 PoE splitter

3.3 LEDDenition:

LED Color Function

PoE IN Green

Lit

To indicate the port is receiving 52~56V

(802.3at/802.3bt) / 48V (802.3af) DC

in-line power.

O

The remote device is not an IEEE 802.

af/at/bt PoE PSE.

LNK/ACT Green

Lit

To indicate the port is linked up at

10/100/1000Mbps.

Blink

To indicate that the extender is actively

sending or receiving data over IN port.

PoE OUT Amber

Lit

To indicate the port is providing 52~56V

(802.3at) / 48V (802.3af) DC in-line

power to remote 802.3af/at PoE PD.

O

To indicate the connected device is not

a PoE powered device (PD).

4.2 Connecting POE-E201 to the Power Source

Equipment (PSE)

There are 2 RJ45 ports in the PoE-E201, of which the “IN” port

functions as "PoE (Data and Power) input" and the “OUT” port

on the other side functions as "PoE (Data and Power) output".

Step 1: Connect a standard Cat.5/5e/6 UTP cable from a PSE,

such as PoE switch, PoE injector hub or single port PoE

injector, to the “IN” port of the POE-E201.

Step 2: The PSE delivers both Ethernet data and PoE power over

UTP cable to the POE-E201 and the “PoE IN” LED will be

steady on.

Data

Power

PoE

Power

Data

100M

POE-E201

802.3at PoE+ Extender

802.3at

PoE Injector

Power Line (AC)

Power Line (DC)

1000BASE-T UTP

PoE

1000BASE-T UTP with PoE

Note

1. The green POE IN LED means the POE-E201 is

being powered successfully with PoE class 0.

2. If the POE IN LED does not light up, check whether

the cable connecting to a remote PSE, or the cable

with a PC or a network device is correct or not. Or

check whether the wattage of power to an IEEE

802.3at/802.3af powered device is right or not.

4.4 Multiple PoE Extender Installation

The POE-E201 PoE+ Extender supports multiple units with daisy-

chain installation. They can be employed in series for even longer

distances based on remote PoE IP Camera or PoE Wireless Access

Point power re-quirement.

Distance

Power Line (AC)

Power Line (DC)

1000BASE-T UTP

PoE

1000BASE-T UTP with PoE

PoE Ethernet Switch/

Injector Hub

PoE

100 meters

PoE

100 meters

PoE

100 meters

PoE

100 meters

PoE

100 meters

PoE

100 meters

PoE

100 meters

PoE

100 meters

PoE

100 meters

PoE

100 meters

Non-PoE IP Camera

PoE Splitter

Power Output

0 meter 100 meters 200 meters 300 meters 400 meters

(24W)(30W) (20W) (16W) (12W)

500 meters

PoE IP Camera

PoE Access Point

802.3at

PoE

Extender

POE-E201

802.3at

PoE

Extender

POE-E201

802.3at

PoE

Extender

POE-E201

802.3at

PoE

Extender

POE-E201

802.3at

PoE

Extender

POE-E201

802.3at

PoE

Extender

POE-E201

802.3at

PoE

Extender

POE-E201

Note

1. Each POE-E201 can withstand a maximum of 2.6

watts. Check the total power consumption of your

IEEE 802.3at/af PD and the POE-E201 before you

make the daisy-chain connection. If the overall power

consumption is overloaded, the local PSE could shut

down the whole power system.

2. Each POE-E201 provides an extended distance of

100 meters over the Cat.5/5e/6 UTP cable. Use of

other non-standard cable could result in unstable

connection.

Summary of content (2 pages)

PAGE 1
3. Hardware Introduction 1. Package Contents Thank you for purchasing PLANET IEEE 802.3at PoE+ Extender, POE-E201. This section describes the hardware features of the POE-E201. Before connecting any network device to the POE-E201, read this chapter carefully. 3.1 Product Outlook Open the box of the PoE+ Extender and carefully unpack it. The box should contain the following items: 4.1 Before Installation User's Manual x 1 IN 70.30 OUT 10/100/1000BASE-T Ethernet+DC IEEE 802.
PAGE 2
4.5 Wall-mount Installation To install the POE-E201 on the wall, please follow the instructions described below. Step 1: Find the wall that you want to mount the POE-E201 on. Step 2: Refer to the picture below to screw the two screws on the wall. The distance between the 2 screws is 46.7mm and the line through them must be horizontal Caution You must use the screws supplied with the mounting brackets. Damage caused to the parts by using incorrect screws would invalidate your warranty. 5.