User Manual
Table Of Contents
A.3 DATA OUT PoE Injector RJ45 Port Pin Assignments
PIN NO RJ45 SIGNAL ASSIGNMENT
1 Output Transmit Data +
2 Output Transmit Data -
3 Receive Data +
4 Power -
5 Power -
6 Receive Data -
7 Power +
8 Power +
A.4 RJ45 pin assignment of non-802.3af / 802.3at standard PD with PD
with Mid-span PoE Mid-span RJ45
assignment
Pin out of Cisco non-802.3af standard PD Pin out of POE Mid-span
PIN NO SIGNAL
1 RX+
2 RX-
3 TX+
4 VCC-
5 VCC-
6 TX-
7 VCC+
8 VCC+
PIN NO SIGNAL
1 RX+
2 RX-
3 TX+
4 VCC-
5 VCC-
6 TX-
7 VCC+
8 VCC+
Before you power PD, please check whether the RJ45 connector pin assignment follows IEEE 802.3af / IEEE 802.3at
standard; otherwise, you may need to change one of the RJ45 connector pin assignments, which is attached with the UTP
cable.
60
User’s Manual of POE-1200G / POE-2400G / HPOE-1200G / HPOE-2400G