User Manual

User’
s Manual of POE-1200G / POE-2400G / HPOE-1200G / HPOE-2400G
44
POE-1200G POE-2400G HPOE-1200G HPOE-2400G
OTP1
52
PoE Budget
210 watts
53
PoE Budget
410 watts
60
PoE Budget
345 watts
53
PoE Budget
690 watts
OTP2
57
PoE Budget
200 watts
60
PoE Budget
380 watts
65
PoE Budget
330 watts
60
PoE Budget
660 watts
 Power Allocation
Displays the current total power consumption status.
 Description
This function provides input per port description and the available letters is 30.
NOTE: The total maximum letters are only 800. Some of special words will count as 5
per word, like ‘, “, \, < and >.
 PoE Function
Allows user to disable or enable per port PoE function.
 Priority
Allows user to set PoE port priority. There are 3 levels that could be configured and
they are Critical, High and Low. The Critical is the highest priority and Low is the
lowest priority.
This function is worked under Priority power limit mode only.
 Device Class
Displays PoE class level.
The IEEE 802.3af standard offers PoE class level from 1 to 3 and IEEE 802.3at
standard offers the class from 1 to 4.
 Current Used [mA]
Displays PoE device current.
 Power Used [W]
Displays PoE device power consumption.
 Power Limit [W]
Allows user to custom-power for port. This function is worked under Total Limit
power limit mode. This function is also related to Power Mode. If Power mode is
802.3af, then user can allocate to 15.4 watts at the maximum; otherwise, user can
allocate to 30 watts.
 Apply
Press this button to take effect.
 Refresh
Press this button to refresh the current Web page.
Table 4-5-2: Descriptions of the PoE Configuration Objects Screen