User Manual

User’
s Manual of POE-1200G / POE-2400G / HPOE-1200G / HPOE-2400G
4.5.1 PoE Configuration
This section provides PoE (Power over Ethernet) Configuration and PoE output status of PoE Injector Hub; screen in
Figure 4-5-2 appears. Table 4-5-2 describes the PoE Configuration object of PoE Injector Hub.
Figure 4-5-2: PoE Configuration Web Page Screen
Object Description
 System PoE Admin Mode
Allows user to disable / enable PoE function.
 Power Supply
Displays PoE power supply status.
 POE Temperature Unit 1
Displays the current operating temperature of PoE chip unit 1.
 POE Temperature Unit 2
Displays the current operating temperature of PoE chip unit 2.
 Power Limit Mode
Allows user to configure power limit mode, which can be chosen.
Consumption: Based on the real device power consumption where PoE power is
delivered as system default setting is in this mode.
Classification: Based on port priority setting and device class where PoE power is
delivered.
 Over Temperature
Protection
Prevent system from being too hot that may cause damage. When PoE unit
temperature rises over the temperature threshold value, PoE power budget will be
reduced.
Please refer to the table below for knowing the OTP level:
43