User Manual

User’s Manual of POE-1200G / POE-2400G / HPOE-1200G / HPOE-2400G
section 4.3.4.
 Firmware Upgrade Allow to upgrade the latest firmware in the future. Explained in section 4.3.5.
 Configuration Setting Allow to back up or restore system configuration. Explained in section 4.3.6.
 Factory Default Allow to reset system to factory default setting. Explained in section 4.3.7.
 System Log
Allow to enable system log and to record system log. Explained in section
4.3.8.
 System Reboot Allow to reboot system. Explained in section 4.3.9.
4.3.1 System Information
This section displays system information of PoE Injector Hub as the screen in Figure 4-3-1 appears. Table 4-3-1 describes
the system information of the PoE Injector Hub.
Figure 4-3-1: System Information Web Page Screen
Object Description
 System Name Displays the PoE Injector Hub model name.
 MAC Address Displays the MAC address of PoE Injector Hub.
 Software Version Displays the current firmware version of PoE Injector Hub.
 Build Time Displays the firmware build time.
 Hardware Version Displays the hardware version of PoE Injector Hub.
 Attain IP Protocol Displays the currently attained IP protocol of PoE Injector Hub.
 IP Address Displays the current IP address of PoE Injector Hub.
 Subnet Mask Displays the current subnet mask address of PoE Injector Hub.
 Gateway Displays the current gateway address of PoE Injector Hub.
 Description Displays the system description of PoE Injector Hub.
 System Date
Displays the current system date of PoE Injector Hub. The system date will be
correct if NTP function is enabled and the Hub is connected to Internet.
 System UpTime Displays when the system will start up.
Table 4-3-1: Descriptions of the System Information Objects Screen
27