Switch User Manual

11
3 MANAGEMENT
This chapter describes how to manage the Web Smart PoE Injector Hub. Topics include:
- Overview
- Management method
- Logging on to the Web Smart PoE injector Hub
3.1 Overview
The Web Smart PoE injector Hub provides a user-friendly, Web interface. Using this interface, you can perform various
device configuration and management activities, including:
 System
 Power over Ethernet
 Tools
3.2 Requirements
■ Network cables.
Use standard network (UTP) cables with RJ45 connectors.
■ Subscriber PC installed with Ethernet NIC (Network Card)
■ Workstations of subscribers running Windows 98/ME, NT4.0, 2000/2003/XP, MAC OS X or later, Linux, UNIX or
other platform compatible with TCP/IP protocols.
■ Above PC installed with WEB Browser and JAVA runtime environment Plug-in
It is recommended to use Internet Expl
ore 6.0 or above to access Web Smart PoE
Injector Hub.
3.3 Management Method
User can manage the Web Smart PoE injector Hub by Web Management via a network connection.
3.3.1 Web Management
The PoE Injector Hub can be configured through an Ethernet connection, make sure the manager PC must be set on same
the IP subnet address with the PoE Injector Hub.
For example, if you have changed the default IP address of the Device to 192.168.99.123 with subnet mask 255.255.255.0
via console, then the manager PC should be set at 192.168.99.x (where x is a number between 2 and 254) with subnet
mask 255.255.255.0. Or you can use the factory default IP address 192.168.0.100 to do the relative configuration on
manager PC.
1. Use Internet Explorer 5.0 or above Web browser. Enter IP address http
://192.168.0.100 (the factory-default IP
address or that you have changed via console) to access the Web interface.