(V3) Datasheet

POE-175-95
2
95 Watts of Power over 4-pair UTP
Instead of delivering power over 2-pair twisted UTP – be it end-span (Pins 1,2,3 and 6) or mid-span (Pins 4,5,7 and 8), it provides the capability to source up
to 95 watts of power by using all the four pairs of standard Cat.5e/Cat. 6 Ethernet cabling.
Cat 5E: 4-pair UTP
95W
Power over Ethernet
End-span
Mid-span
100~240V AC IN
10/100/1000Mbps Data
10/100/1000Mbps Data
12V/19V/24V
POE-175-95
Injector
Splitter
47.5W47.5W
47.5W47.5W
PoE Standard
IEEE 802.3af
(802.3at Type 1)
IEEE 802.3at
(802.3at Type 2)
IEEE 802.3bt
(802.3at Type 3)
IEEE 802.3bt
(802.3bt Type 4)
UPoE
Maximum Power
D
elivered by PSE
15.4 watts 30 watts 60 watts 95 watts 95 watts
Power Available at PD 12.95 watts 25.5 watts 51 watts 71 watts 72 watts
Voltage Range 48V 50~57V 50~57V 52~57V 52~57V
Twisted-pair Used 2-pair 4-pair 4-pair 4-pair
Supported Modes
End-span or Mid-span
End-span +
Mid-span
End-span +
Mid-span
End-span +
Mid-span
Supported Cabling Cat. 3/5/5e/6 Cat. 5e/6 Cat. 5e/6 Cat. 5e/6
Dip Switch for PoE BT / UPoE / Legacy BT mode, built-in PoE Injector
The POE-175-95 provides power to those powered devices which do not fully follow the IEEE 802.3 af/at/bt standard. The UPoE and Legacy bt mode
provide the PD with 60 to 95 watts power output voltage.
■BT mode: Powered devices that fully support IEEE 802.3 bt standards with output budget of 90W.
■UPoE mode: Powered devices that support Cisco UPoE standards or PoH standards with output budget 95W.
■Legacy BT Mode: PD devices that support capacitive or resistance electronic tag with output budget of 90W.
All-in-One and Compact Size Design
It is easy to install the PoE injector by way of Plug and Play and comes with simple troubleshooting, making it easy for business and home users to own
it. Besides, the POE-175-95 comes in compact housing, and has a built-in internal power supply. On the side panel of the POE-175-95 features one 100-
240V AC input socket, real-time LEDs (Power LED, PoE-in-Use LED and PoE Max LED) and two RJ45 ports -- Ethernet port and Ethernet+DC port. Simply
plug in the Ethernet cables and AC power cord, and the POE-175-95 is ready to provide high-speed network communication and the 802.3bt PoE++ injector
functionssimultaneouslywithnoneedofsoftwareconguration.