Datasheet

POE-173
2
60 watts of Power over 4-Pair UTP
The POE-173 and POE-171S Ultra PoE solution use the same cabling standard as IEEE 802.3at / af PoE. Instead of delivering power over 2-pair twisted
UTP – be it End-Span (Pin 1,2,3 and 6) or Mid-Span (Pin 4,5,7 and 8), it provides the capability to source up to 60 watts of power by using all the four
pairs of standard Cat5e / Cat6 Ethernet cabling. In the new 4-pair system, two PSE controllers will be used to power both the data pairs and the spare pairs.
All-in-One and Compact Size Design
With concepts of "Easy to install”, “Plug and Play” and "Simple troubleshooting" for business and home users, the POE-173 is an all-in-one, single-port PoE+
injector with internal power supply. In the compact size housing, the POE-173 provides one 100-240V AC input socket on its front panel, two LEDs (System
POWER and PoE ACTIVE ) at top side and two RJ-45 ports (POE port and LAN port) at rear panel. Simply plug in the Ethernet cables and power cord,
and the POE-173 is ready to provide high speed network communication and Ultra power PoE injector functions simultaneously with no need of software
conguration.
10/100/1000Mbps
Data
Cat 5E: 4-Pair UTP
60W
Power over Ethernet
End-Span
Mid-Span
10/100/1000Mbps Data
100~240V AC IN
12V/19V/24V
Ultra PoE SplitterUltra PoE Injector
Power Side
LAN Connector Side
Top Side LED
PoE Standard
IEEE 802.3at (802.3af Type 1) IEEE 802.3at (802.3at Type 2) Ultra PoE (POE-173)
Maximum Power delivered by PSE 15.4 watts 30 watts 60 watts
Power Available at PD 12.95 watts 25.5 watts 50 watts
Voltage Range 48V 50~57V 50V
Twisted Pair Used 2-Pair 2-Pair 4-Pair
Supported Modes End-Span or Mid-Span End-Span or Mid-Span End-Span + Mid-Span
Supported Cabling Cat 3/5/5e/6 Cat 3/5/5e/6 Cat5e/6