User Manual

11
1. Select the right DC power output and connect DC plug from
“DC OUT” of the POE-172S to remote device.
DC Out Ethernet
10/100/1000BASE-T
12V 19V 24V
Incorrect voltage might cause device damage
CAUTION
Disconnect “PoE In” cable
before changing Voltage
Note
2. Connect standard UTP cable from “Ethernet” port of the
POE-172S to remote device.
3. Connect standard UTP cable from “PoE In” port of the
POE-172S to PoE switch/injector.
PoE In
POE-172S
Ultra PoE Splitter
10/100/1000BASE-T
4. Power on the PoE switch/injector to enable the POE-172S and
remote device to be powered.
Note
Please ensure the POE-172S output voltage is
correct before applying power to remote device.
The POE-172S provides DC12V/19V/24V power
output.