Datasheet
POE-171S
2
Cost-eective and Easy Cabling Installation
In the IEEE 802.3at Gigabit high Power over Ethernet devices installation, the system administrator only has to connect one single RJ-45 Ethernet cable
to carry both power and data from an IEEE 802.3at/af PoE injector to the POE-171S, and then the POE-171S splits data and DC power to any of IP
networking devices. Besides, to connect through IEEE 802.3at Power over Ethernet injector and the POE-171S, you can also have the benefits of cost
saving, easy networking planning and higher reliability. Upon the completion of the installation of IEEE 802.3at compliant devices, the POE-171S, when
functioning with the POE-171, can make the connection while migrating or splitting the power and the Ethernet digital packets to PTZ (Pan, Tilt & Zoom) and
Speed Dome network cameras, color touch-screen IP phones, multi-channel wireless LAN access points and other network devices that need 50-watt high
power to work normally.
50 watts of Power over 4-Pair UTP
The POE-171S and POE-171 ultra PoE solution use cabling standard as IEEE 802.3at/af PoE. Instead of delivering power over 2-pair twisted UTP – be
it End-span (Pin 1, 2, 3 and 6) or Mid-span (Pin 4, 5, 7 and 8), it provides the capability to source up to 50 watts of power by using all the four pairs of
standard Cat5e/6 Ethernet cabling. In the new 4-pair system, two PSE controllers will be used to power both the data pairs and the spare pairs.
10/100/1000Mbps
Data
10/100/1000Mbps
Data
56V DC IN
Cat 5E: 4-Pair UTP
End-Span
Mid-Span
12V/19V/24V
DC Out
InjectorPOE-171 Ultra PoE Splitter
PWR
802.3at End-Span
802.3at Mid-Span
60W Ultra
Power over Ethernet
Injector
PoE In-use
PWR
End-Span PoE Input
Mid-Span PoE Input
60W Ultra
Power over Ethernet
Splitter
PoE In
Ultra PoE Splitter and Injector Installation
For a place which is hard to find the power inlet, the POE-171S and PLANET Ultra PoE Injector - POE-171 or POE-173, operate as a pair to provide the
easiest way to power your Ethernet devices which need high power input. The POE-171S separates digital data and power into three optional outputs
(12V/19V/24V DC) to non-PoE devices such as laptops, PTZ (Pan, Tilt & Zoom) network cameras, PTZ Speed Dome cameras, color touch-screen IP
phones, multi-channel wireless LAN access points and other network devices at distance up to 100 meters.
Application
Switch
Power 12V/19V/24V
POE-171S
100 meters
Power
Data
Power
Data
PoE
Power
Data
AC
DC
Laptop
1000Base-T UTP
PoE
1000Base-T UTP with PoE
Power Line (AC)
AC
DC
Power Line (DC)
POE-173
Ultra PoE
Splitter
Ultra PoE Injector