User's Manual

- 9 -
- 10 -
- 11 -
- 12 - - 13 - - 14 -
Detection of DC input voltage of POE-171A series:
When user powers on the POE-171A injector via the DC adapter, the
injector will detect the DC input voltage and then PoE Usage LED will
ash three times.
LED Description
20W/30W
Flashing three times means the DC input voltage is
48~51V.
40W/60W
Flashing three times means the DC input voltage is
52~54V.
60W+/90W+
Flashing three times means the DC input voltage is
55~56V.
Monitoring of power usage of POE-171A-60:
LED Description
20W
1. O to indicate the PoE usage is less than 9W.
2. Blinks to indicate that the PoE usage is around 10W to 19W.
3. Lights to indicate the PoE usage is more than 20W.
40W
1. Blinks to indicate that the PoE usage is around 30W to 39W.
2. Lights to indicate the PoE usage is more than 40W.
60W+
1. Blinks to indicate that the PoE usage is around 50W to 59W.
2. Lights to indicate the PoE usage is maximum.
Monitoring of power usage of POE-171A-95:
LED Description
30W
1.O to indicate the PoE usage is less than 14W.
2. Blinks to indicate that the PoE usage is around 15W to 29W.
3. Lights to indicate the PoE usage is more than 30W.
60W
1. Blinks to indicate that the PoE usage is around 45W to 59W.
2. Lights to indicate the PoE usage is more than 60W.
90W+
1. Blinks to indicate that the PoE usage is around 75W to 89W.
2. Lights to indicate the PoE usage is maximum.
LED Indicators:
LED Color Function
PWR Green
Lights to indicate the 802.3bt PoE++ injector
has power.
PoE-in-Use Amber
Lights to indicate the device is providing PoE
power.
Force Amber
Lights to indicate the device is working in Force
mode.
PoE Usage Amber
PoE Usage LED can monitor the DC input voltage
or the status of the power usage.
Monitoring of power usage of POE-176-95:
LED Description
30W
1. O to indicate the PoE usage is less than 14W.
2. Blinks to indicate that the PoE usage is around 15W to 29W.
3. Lights to indicate the PoE usage is more than 30W.
60W
1. Blinks to indicate that the PoE usage is around 45W to 59W.
2. Lights to indicate the PoE usage is more than 60W.
90W+
1. Blinks to indicate that the PoE usage is around 75W to 89W.
2. Lights to indicate the PoE usage is maximum.
PoE Mode:
PoE Mode Description
802.3bt
Lights to indicate the device is working in IEEE 802.3af/at/
bt PoE mode.
Force
Lights to indicate the device is working as 4-pair 60-watt
force PoE PSE.
PoE Mode:
PoE Mode Description
Standard Fully conforms to the IEEE 802.3af/at/bt standard.
Legacy
The legacy detection is to identify the valid current
signature of the PDs that do not fully follow the IEEE
802.3af/at/bt standard. This protects against damage to
the PDs as the right PoE mode is applied.
Force
If the output power of injector is less than 1 watt when it
works in Legacy mode; after 20 seconds, the Force mode
will be enabled.
When the Force mode is enabled, it will provide PD with
max. 60W.
If the output power of injector is less than 1 watt when it
works in Force mode; after 2 seconds, the Legacy mode
will be enabled.
802.3bt
Force
PoE Mode
PWR PoE-in-Use Force
IEEE 802.3bt Power over Ethernet Injector
Ethernet+DC
10/100/1G/2.5G/5G/10G
90W+
60W 30W
PoE Usage
POE-176-95
802.3bt PoE++ Injector
Ethernet
10/100/1G/2.5G/5G/10G
52-56V , 2.5A max.
Figure 3: POE-176-95 Outlook
Note
1. After adjusting the DIP switch, the PoE port will stop
and then work again.
2. Before connecting the Ethernet+DC port to network
device, please make sure that it accepts PoE input to
prevent damage.
5. Hardware Installation
The following section describes the hardware installation of the
POE-171A series and POE-176-95. Before connecting any network
device to it, please read this chapter carefully.
5.1 Before Installation
Before your installation, it is recommended to check your network
environment. If there is any IEEE 802.3bt device that needs to be
powered on and works normally, the POE-171A series/POE-176-95
provides you with a way out to supply power to this Ethernet device
conveniently and easily. The POE-171A series/POE-176-95 is equipped
with a power adaptor which is 100-240V AC input and injects DC
52~56V power into the pin of the twisted-pair cable (pair 1/2 [-], 3/6
[+] and pair 4/5 [+], 7/8 [-]).
5.2 POE-171A series/POE-176-95 Installation
1. Connect the AC power adaptor to the “52-56V DC IN” of the POE-
171A series/POE-176-95; the “PWR” LED will be steadily on.
2. Connect a standard Ethernet cable from an Ethernet switch or PC
workstation to the “Ethernet” port of the POE-171A series/POE-176-
95.
3. Connect the long cable to the “Ethernet+DC” port of the POE-171A
series/POE-176-95 and the IEEE 802.3af/at/bt PD.
4. The POE-171A series/POE-176-95, adopting the IEEE 802.3af/at/
bt technology, can directly connect with any IEEE 802.3af/at/bt end-
nodes, such as PTZ (pan, tilt & zoom) network cameras, PTZ speed
dome cameras, color touch screen, Voice over IP (VoIP) telephones
and multi-channel wireless LAN access points as the screen in Figure
3 is shown below.
10G/5G/2.5G/1G/100Mbps Data Rate
AC-to-DC Adapter
110-240V AC
PoE+ IP Camera
PoE+ Wireless AP
5-speed Multi-Gigabit Ethernet Switch
RJ45 UTP Cable
Power
Data
Power
Data
Powered Devices
802.3bt PoE
++
Splitter
802.3bt PoE
++
Injector
PWR
PoE-in-Use
Legacy
Power over Ethernet Injector
Figure 3: Architecture of Connected IEEE 802.3af/at/bt Devices
Once the POE-171A series/POE-176-95 detects the existence of an IEEE
802.3af/at/bt device, the PoE-in-Use LED indicator will be steadily on
to show it is providing power.
Note
1. The 10Gbps speed is available for the POE-176-95 only.
2. Since the PoE port of the POE-171A series/POE-176-95
supports 52-56V DC PoE power output, please check
and assure the PD accepts DC power range of 52-56V
DC. Otherwise, it will damage the PD.
6. Customer Support
Thank you for purchasing PLANET products. You can browse our online
FAQ resource at the PLANET Web site rst to check if it could solve your
issue. If you need more support information, please contact PLANET
support team.
PLANET online FAQs:
http://www.planet.com.tw/en/support/faq?method=category&c1=2
Support team mail address:
[e-mail]
Copyright © PLANET Technology Corp. 2021.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.
FCC Warning
This device has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with
the Instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
CE Mark Warning
This is a Class A product. In a domestic environment, this product may
cause radio interference, in which case the user may be required to take
adequate measures.
WEEE Warning
To avoid the potential eects on the environment and human
health as a result of the presence of hazardous substances in
electrical and electronic equipment, end users of electrical and
electronic equipment should understand the meaning of the
crossed-out wheeled bin symbol. Do not dispose of WEEE as unsorted
municipal waste and have to collect such WEEE separately.