POE-171A-Series (V3) User Manual
- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
1. Package Contents
Thank you for purchasing PLANET POE-171A Single-port 802.3bt
PoE++ Injector series shown below:
Model LAN Port Speed PoE Standard PoE Budget
POE-171A-60
10M/100M/1G/
2.5G/5Gbps
IEEE 802.3af/at/bt 60 watts
POE-171A-95
10M/100M/1G/
2.5G/5Gbps
IEEE 802.3af/at/bt 95 watts
Please unpack the box of the device carefully, and the box should
contain the following items:
802.3bt PoE injector x 1
User’s manual x 1
Power adaptor x 1
AC power cord x 1
If any item is found missing or damaged, please contact your local
reseller for replacement.
3.ProductSpecications
Product POE-171A-60 POE-171A-95
Hardware Specications
Interface
Input Port
1 x RJ45 STP
Data In
Output
Port
1 x RJ45 STP
PoE (Data + Power) Out
DC Socket 1 x 52~56V DC input socket
Network Cable*
Twisted-pair cable up to 100 meters (328ft)
10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6, 6A
100BASE-TX: 4-pair UTP Cat. 5, 5e, 6, 6A
1G/2.5G: 4-pair UTP Cat. 5e, 6, 6A
5G: 4-pair UTP Cat. 6, 6A
LED Indicators
System: Power x 1 (Green)
PoE Port: PoE-in-Use x 1 (Amber)
Legacy Mode: Legacy x 1 (Amber)
PoE Usage: PoE Usage x 3 (Amber)
Data Rate 10M/100M/1G/2.5G/5Gbps
Dimensions
(W x D x H)
94 x 70.3 x 26.2 mm
Weight 200g 250g
Unit Output Voltage DC 52~56V
Power Requirements DC 52-56V, 1.4A max. DC 52-56V, 2.5A max.
Power Consumption 72 watts max. 130 watts max.
No. of Devices that
can be powered
1
Power over Ethernet
PoE Standard IEEE 802.3af/at/bt PSE
Standard
Legacy
PoE Mode
Ethernet+DC
10/100/1G/2.5G/5G
90W+
60W
30W
PoE Usage
PWR
PoE-in-Use
Legacy
IEEE 802.3bt Power over Ethernet Injector
POE-171A-95
802.3bt PoE++ Injector
Ethernet
10/100/1G/2.5G/5G
52-56V , 2.5A max.
Figure 2: POE-171A-95 Outlook
Standards Conformance
Standards
Compliance
IEEE 802.3 10BASE-T
Ethernet
IEEE 802.3u
100BASE-TX Fast
Ethernet
IEEE 802.3ab
1000BASE-T Gigabit
Ethernet
IEEE 802.3bz
2.5G/5GBASE-T
IEEE 802.3bt 4-pair
Power over Ethernet
(Type 3)
IEEE 802.3at Power
over Ethernet Plus
IEEE 802.3af Power
over Ethernet
IEEE 802.3 10BASE-T
Ethernet
IEEE 802.3u
100BASE-TX Fast
Ethernet
IEEE 802.3ab
1000BASE-T Gigabit
Ethernet
IEEE 802.3bz
2.5G/5GBASE-T
IEEE 802.3bt 4-pair
Power over Ethernet
(Type 4)
IEEE 802.3at Power
over Ethernet Plus
IEEE 802.3af Power
over Ethernet
Regulatory
Compliance
FCC Part 15 Class A, CE
Environment
Operating
Temperature
0 ~ 50 degrees C
Storage Temperature -10 ~ 70 degrees C
Operating Humidity 5 ~ 90%, relative humidity, non-condensing
Storage Humidity 5 ~ 90%, relative humidity, non-condensing
1. As the IEEE 802.3bt device provides high power,
please use high-quality network cable and RJ45
connector.
2. The maximum PoE output power depends on the
cable length, the quality of cable, and DC input
voltage.
2. Product Features
Interface
2 RJ45 interfaces
1-port Data + Power output
1-port Data input
1 DC 52~56V input power socket
1 PoE mode (Standard/Legacy) DIP switch
Power over Ethernet
Complies with IEEE 802.3af/at/bt PoE end-span/mid-span PSE
Supports PoE power up to 60/95 watts for PoE port
Auto-detection of PoE IEEE 802.3af/at/bt equipment and
devices from being damaged by incorrect installation
Monitor the status of the total PoE usage in real time
Remote power feeding up to 100m
Auto-detection of DC input voltage
PoE Power Output
Budget
DC 54V / 60-watt
PoE via 4-pair
DC 54V / 30-watt
PoE via 2-pair
DC 54V / 95-watt
PoE via 4-pair
DC 54V / 30-watt
PoE via 2-pair
PoE Power Output
Max. 60W for 1 m
cable
Max. 52W for 100 m
cable
Max. 89.5W for 1 m
cable
Max. 72W for 100 m
cable
PoE Power Supply
Type
End-span + Mid-span
Power Pin
Assignment
Pair 1 End-span: 1/2 (-), 3/6 (+)
Pair 2 Mid-span: 4/5 (+), 7/8 (-)
PoE Mode
Standard: To provide power to the PD
devices that follow the IEEE 802.3af/at/bt
standard.
Legacy: To provide power to the PD devices
that do not fully follow the IEEE 802.3af/
at/bt standard. Besides, the Legacy mode
supports PoH and Ultra PoE.
Force: If the output power of injector is less
than 1 watt when it works as Legacy mode,
after 20 seconds, the Force mode will be
enabled.
When the Force mode is enabled, it will
provide PD with max. 60W.
If the output power of injector is less than 1
watt when it works as Force mode, after 2
seconds, the Legacy mode will be enabled.
4. Product Outlook
Standard
Legacy
PoE Mode
Ethernet+DC
10/100/1G/2.5G/5G
60W+
40W
20W
PoE Usage
PWR
PoE-in-Use
Legacy
POE-171A-60
802.3bt PoE++ Injector
Ethernet
10/100/1G/2.5G/5G
52-56V , 2.5A max.
IEEE 802.3bt Power over Ethernet Injector
Figure 1: POE-171A-60 Outlook
LED Indicators:
LED Color Function
PWR Green
Lights to indicate the 802.3bt PoE injector
has power.
PoE-in-Use Amber
Lights to indicate the device is providing PoE
power.
Legacy Amber
Lights to indicate the device is working in
Legacy mode.
PoE Usage Amber
PoE Usage LED can monitor the DC input
voltage or the status of the power usage.
Detection of DC input voltage of POE-171A series:
When user powers on the POE-171A injector via the DC adapter,
the injector will detect the DC input voltage and then PoE Usage
LED will ash three times.
LED Description
20W/30W
Flashing three times means the DC input voltage
is 48~51V.
40W/60W
Flashing three times means the DC input voltage
is 52~54V.
60W+/90W+
Flashing three times means the DC input voltage
is 55~56V.