User's Manual
- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
1. Package Contents
Thank you for purchasing PLANET POE-171A and POE-176-95 single-
port multi-Gigabit 802.3bt PoE++ Injector series and their brief product
descriptions are shown in the table below:
Model LAN Port Speed PoE Standard PoE Budget
POE-171A-60
10M/100M/1G/
2.5G/5Gbps
IEEE 802.3af/at/bt 60 watts
POE-171A-95
10M/100M/1G/
2.5G/5Gbps
IEEE 802.3af/at/bt 95 watts
POE-176-95
10M/100M/1G/
2.5G/5G/10Gbps
IEEE 802.3af/at/bt 95 watts
If any item is found missing or damaged, please contact your local
reseller for replacement.
802.3bt PoE++ injector x 1
User’s manual x 1
Power adaptor x 1
AC power cord x 1
If any item is found missing or damaged, please contact your local
reseller for replacement.
2. Product Features
Interface
2 RJ45 interfaces
1-port Data + Power output
1-port Data input
1 DC 52~56V input power socket
LED Indicators
System: Power x 1 (Green)
PoE Port: PoE-in-Use x 1 (Amber)
Legacy Mode: Legacy x 1 (Amber)
PoE Usage: PoE Usage x 3 (Amber)
Data Rate 10M/100M/1G/2.5G/5Gbps
Dimensions
(W x D x H)
94 x 70.3 x 26.2 mm
Weight 200g 250g
Unit Output Voltage DC 52~56V
Power Requirements DC 52-56V, 1.4A max. DC 52-56V, 2.5A max
Power Consumption 72 watts max. 130 watts max.
No. of Devices that
can be powered
1
Power over Ethernet
PoE Standard IEEE 802.3af/at/bt PSE
PoE Power Output
Budget
DC 54V/30-watt PoE
via 2-pair
54V/60-watt PoE via
4-pair
DC 54V/30-watt PoE
via 2-pair DC
54V/95-watt PoE via
4-pair
PoE Power Output
Max. 60W for
1 m cable
Max. 52W for
100 m cable
Max. 89.5W for
1 m cable
Max. 72W for
100 m cable
PoE Power Supply
Type
End-span + Mid-span
Power Pin
Assignment
Pair 1 End-span: 1/2 (-), 3/6 (+)
Pair 2 Mid-span: 4/5 (+), 7/8 (-)
Environment
Operating Temperature 0 ~ 50 degrees C
Storage Temperature -10 ~ 70 degrees C
Operating Humidity 5 ~ 90%, relative humidity, non-condensing
Storage Humidity 5 ~ 90%, relative humidity, non-condensing
1. As the IEEE 802.3bt device provides high power, please
use high-quality network cable and RJ45 connector.
2. The maximum PoE output power depends on the cable
length, the quality of cable, and DC input voltage.
4. Product Outlook
Standard
Legacy
PoE Mode
Ethernet+DC
10/100/1G/2.5G/5G
60W+
40W
20W
PoE Usage
PWR
PoE-in-Use
Legacy
POE-171A-60
802.3bt PoE++ Injector
Ethernet
10/100/1G/2.5G/5G
52-56V , 2.5A max.
IEEE 802.3bt Power over Ethernet Injector
Figure 1: POE-171A-60 Outlook
Regulatory
Compliance
FCC Part 15 Class A, CE
Environment
Operating
Temperature
0 ~ 50 degrees C
Storage Temperature -10 ~ 70 degrees C
Operating Humidity 5 ~ 90%, relative humidity, non-condensing
Storage Humidity 5 ~ 90%, relative humidity, non-condensing
Product POE-176-95
Hardware Specications
Interface
Input
Port
1 x RJ45 STP
Data In
Output
Port
1 x RJ45 STP
PoE (Data + Power) Out
DC Socket 1 x 52~56V DC input socket
Network Cable
Twisted-pair cable up to 100 meters (328ft)
10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6, 6A
100BASE-TX: 4-pair UTP Cat. 5, 5e, 6, 6A
1G/2.5G: 4-pair UTP Cat 5e/Cat 6/Cat 6A/Cat 7
5G: 4-pair UTP Cat 6/Cat 6A/Cat 7
10G: 4-pair UTP Cat 6A/Cat 7
LED Indicators
System: Power x 1 (Green)
PoE Port: PoE-in-Use x 1 (Amber)
Force Mode: Force x 1 (Amber)
PoE Usage: PoE Usage x 3 (Amber)
Data Rate 10M/100M/1G/2.5G/5G/10Gbps
Dimensions
(W x D x H)
94 x 70.3 x 26.2 mm
Weight 195g
1 PoE mode (Standard/Legacy) DIP switch
(POE-171A-60/POE-171A-95)
1 PoE mode (802.3bt/Force) DIP switch (POE-176-95)
Power over Ethernet
Complies with IEEE 802.3af/at/bt PoE end-span/mid-span PSE
Supports PoE power up to 60/95 watts for PoE port
Auto-detection of PoE IEEE 802.3af/at/bt equipment and devices
from being damaged by incorrect installation
Monitor the status of the total PoE usage in real time
Remote power feeding up to 100m
Auto-detection of DC input voltage
3.ProductSpecications
Product POE-171A-60 POE-171A-95
Hardware Specications
Interface
Input
Port
1 x RJ45 STP
Data In
Output
Port
1 x RJ45 STP
PoE (Data + Power) Out
DC Socket 1 x 52~56V DC input socket
Network Cable
Twisted-pair cable up to 100 meters (328ft)
10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6, 6A
100BASE-TX: 4-pair UTP Cat. 5, 5e, 6, 6A
1G/2.5G: 4-pair UTP Cat 5e/Cat 6/Cat 6A/Cat 7
5G: 4-pair UTP Cat 6/Cat 6A/Cat 7
PoE Mode
Standard: To provide power to the PD devices
that follow the IEEE 802.3af/at/bt standard.
Legacy: To provide power to the PD devices
that do not fully follow the IEEE 802.3af/at/bt
standard. Besides, the Legacy mode supports
PoH and Ultra PoE.
Force: If the output power of injector is less
than 1 watt when it works in Legacy mode;
after 20 seconds, the Force mode will be
enabled.
When the Force mode is enabled, it will provide
PD with max. 60W.
If the output power of injector is less than
1 watt when it works in Force mode; after 2
seconds, the Legacy mode will be enabled.
Standards Conformance
Standards
Compliance
IEEE 802.3 10BASE-T
Ethernet
IEEE 802.3u
100BASE-TX Fast
Ethernet
IEEE 802.3ab
1000BASE-T Gigabit
Ethernet
IEEE 802.3bz
2.5G/5GBASE-T
IEEE 802.3af Power
over Ethernet
IEEE 802.3at Power
over Ethernet Plus
IEEE 802.3bt 4-pair
Power over Ethernet
(Type 3)
IEEE 802.3 10BASE-T
Ethernet
IEEE 802.3u
100BASE-TX Fast
Ethernet
IEEE 802.3ab
1000BASE-T Gigabit
Ethernet
IEEE 802.3bz
2.5G/5GBASE-T
IEEE 802.3af Power
over Ethernet
IEEE 802.3at Power
over Ethernet Plus
IEEE 802.3bt 4-pair
Power over Ethernet
(Type 4)
Unit Output Voltage DC 52~56V
Power Requirements DC 52-56V, 2.5A max
Power Consumption 103 watts max.
No. of Devices that
can be powered
1
Power over Ethernet
PoE Standard IEEE 802.3af/at/bt PSE
PoE Power Output
Budget
DC 54V/30-watt PoE via 2-pair
DC 54V/60-watt PoE via 4-pair
DC 54V/95-watt PoE via 4-pair
PoE Power Output
Max. 86.8W for 1 m cable
Max. 72W for 100 m cable
PoE Power Supply
Type
End-span + Mid-span
Power Pin Assignment
Pair 1 End-span: 1/2 (-), 3/6 (+)
Pair 2 Mid-span: 4/5 (+), 7/8 (-)
PoE Mode
802.3bt: To provide power to the PD devices
that follow the IEEE 802.3af/at/bt standard.
Force: When the Force mode is enabled, it will
provide PD with max. 60W.
Standards Conformance
Standards Compliance
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3bz 2.5G/5G/10GBASE-T
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3bt 4-pair Power over Ethernet
(Type 4)
Regulatory Compliance FCC Part 15 Class A, CE
Standard
Legacy
PoE Mode
Ethernet+DC
10/100/1G/2.5G/5G
90W+
60W
30W
PoE Usage
PWR
PoE-in-Use
Legacy
IEEE 802.3bt Power over Ethernet Injector
POE-171A-95
802.3bt PoE++ Injector
Ethernet
10/100/1G/2.5G/5G
52-56V , 2.5A max.
Figure 2: POE-171A-95 Outlook
LED Indicators:
LED Color Function
PWR Green
Lights to indicate the 802.3bt PoE++ injector
has power.
PoE-in-Use Amber
Lights to indicate the device is providing PoE
power.
Legacy Amber
Lights to indicate the device is working in Legacy
mode.
PoE Usage Amber
PoE Usage LED can monitor the DC input voltage
or the status of the power usage.