Single-Port 10/100/1000Mbps Ultra PoE Injector (60 Watts) POE-171 Single-Port 10/100/1000Mbps Ultra PoE Splitter (12V/19V/24V) POE-171S User’s Manual Version 1.
Trademarks Copyright © PLANET Technology Corp. 2013. Contents are subject to revision without prior notice. PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners. Disclaimer PLANET Technology does not warrant that the hardware will work properly in all environments and applications, and makes no warranty and representation, either implied or expressed, with respect to the quality, performance, merchantability, or fitness for a particular purpose.
interference in which case the user will be required to correct the interference at his own expense. CE Mark Warning This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Energy Saving Note of the Device This power required device does not support Standby mode operation. For energy saving, please remove the power cable to disconnect the device from the power circuit.
Table of Contents 1. Package Contents.............................................................. 5 2. Product Features............................................................... 6 3. Product Specifications........................................................ 8 4. Product Outlook............................................................... 12 5. Hardware Installation....................................................... 14 5.1 Before Installation.................................................
1. Package Contents Thank you for purchasing PLANET Single-Port 10/100/1000Mbps POE-171 or POE-171S. Model LAN Port Speed PoE Standard POE-171 10/100/1000Mbps IEEE 802.3at/af Model PoE Budget 60 watts LAN Port Speed PoE Standard DC Out POE-171S 10/100/1000Mbps IEEE 802.
2. Product Features [POE-171] Interface ll 2-Port RJ-45 interfaces 1-Port Data + Power output 1-Port Data input ll 1 DC 52~56V input power socket Power over Ethernet ll Ultra Power over Ethernet End-Span / Mid-Span PSE ll IEEE 802.3at PoE compliant ll Backward compatible with IEEE 802.3af PD device ll Supports PoE Power up to 60 watts for PoE port ll Auto-detection of PoE IEEE 802.
ll Splits the 56V DC power over RJ-45 Ethernet cable into DC 12V/19V/24V output ll Distance up to 100 meters ll IEEE802.3af Injector devices compatible Hardware ll Metal case ll LED indicators for Power LED and PoE In-use LED Standard Compliance ll IEEE 802.3 10Base-T ll IEEE 802.3u 100Base-TX ll IEEE 802.3ab 1000Base-T ll IEEE 802.3at High Power over Ethernet ll IEEE 802.
3. Product Specifications Product POE-171 Hardware Specifications Interface Network Cable LAN Ethernet 1 x RJ-45 STP, “Data” Input Port Ethernet+DC (PoE) 1 x RJ-45 STP, Data + Power” Output Port Power 1 x DC 56V Input socket Ultra PoE (60W) 4-Pair UTP Cat. 3, 4, 5, up to 100m (328ft) 802.3af/at PoE (15W / 30W) 2-Pair UTP Cat. 3, 4, 5, up to 100m (328ft) LED Indicator System: Power x 1 (Green) PoE Port: PoE In-use x 2 (Green) Data Rate 10/100/1000Mbps Dimensions (W x D x H) 94 x 70.
Storage Humidity 5 ~ 90%, Relative Humidity, non-condensing Power over Ethernet PoE Standard Ultra PoE over 4-pair UTP, IEEE 802.3at High Power over Ethernet End-Span / Mid-Span PSE PoE Power Output Budget DC 56V / 60 Watts PoE Power Supply Type End-Span + Mid-Span Power Pin Assignment Pair 1 End-Span: 1/2(-), 3/6(+) Pair 2 Mid-Span: 4/5(+), 7/8(-) Standards Conformance Standards Compliance IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.
Product POE-171S Hardware Specifications Interface Network Cable Ethernet 1 x RJ-45 STP, Ethernet data output port PoE In 1 x RJ-45 STP, PoE power input port Power socket 1 x DC out power socket Ultra PoE (60W) 4-Pair UTP Cat. 3, 4, 5, up to 100m (328ft) 802.3af/at PoE (15W / 30W) 2-Pair UTP Cat. 3, 4, 5, up to 100m (328ft) LED Indicator System: Power x 1 (Green) PoE In-use x 2 (Green) Data Rate 10/100/1000Mbps Dimensions (W x D x H) 94 x 70.3 x 26.
Storage Humidity 5 ~ 90%, Relative Humidity, non-condensing Power over Ethernet PoE Standard IEEE 802.3at High Power over Ethernet End-Span / Mid-Span PD PoE Power Output Budget DC 56V / 50 Watts PoE Power Supply Type End-Span / Mid-Span Power Pin Assignment 1/2(-), 3/6(+) / 4/5(+), 7/8(-) Standards Conformance Standards Compliance IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.3at High Power over Ethernet IEEE 802.
4. Product Outlook Ethernet Ethernet + DC 10/100/1000Base-T Figure 1: shows overview of POE-171. 60W Ultra Power over Ethernet Injector POE-171 n pa R d-S PW t En n a pa 2.3 id-S 80 M at 2.
POE-171 LED Indicators LED PWR Color Function Green Lights to indicate the ultra PoE injector has power. 802.3at Green End-Span Lights to indicate the ultra PoE injector is working in End-Span mode and offers up to 30 watts of power. 802.3at Mid-Span Lights to indicate the ultra PoE injector is working in Mid-Span mode and offers up to 30 watts of power. Green POE-171S LED Indicators LED Color Function PWR Green Lights to indicate the ultra PoE splitter has power.
5. Hardware Installation The following section describes the hardware features of PoE-171 and POE-171S. Before connecting any network device to them, please read this chapter carefully. Please refer to following sections for detailed information about POE-171 5.1 Before Installation Before your installation, it is recommended to check your network environment. If there is any IEEE 802.
2. Connect a standard Ethernet cable from an Ethernet switch or PC workstation to “Ethernet” port of POE-171. 3. Connect the long cable to “Ethernet+DC” port. 4. Connect with IEEE 802.3at/802.3af devices. Due to the capability of IEEE 802.3at/802.3af Power over Ethernet, the POE-171 can directly connect with any IEEE 802.3at/802.
Note 1. Since the PoE port of PoE-171 supports 52-56V DC PoE power output, please check and assure the powered device (PD) accepts DC power range of 52-56V DC. Otherwise, it will damage the powered device (PD). 2. If the connected device is not fully complied with IEEE 802.3at/802.3af Power over Ethernet or in-line power device, the LED indicator of POE-171 will not be steadily on. 5.3 The POE-171 and POE-171S Installation Note Please turn off POE-171S before you switch DC power output mode. 1.
100 meters Switch Laptop Data Power Data Data PoE AC DC Power Power POE-171 Ultra PoE Injector POE-171S Power 12V/19V/24V Ultra PoE Splitter 1000Base-T UTP PoE 1000Base-T UTP with PoE AC Power Line (AC) DC Power Line (DC) Figure 4: Connected architecture over POE-171 and POE-171S Note 1. According to IEEE 802.3at/802.3af Power over Ethernet, the POE-171 will not inject power to the cable if not connected to IEEE 802.3at/802.3af device. 2.
LED of POE-171 and “PoE IN” LED of POE-E201 will light up continuously. 4 Connect the additional standard Ethernet cable that will be used for connecting to the remote powered device (PD) to the “OUT” port of POE-E201. 5. The “OUT” port is also the power injectors which transmit DC Voltage to the standard network cable and transfer data and power simultaneously between the POE-171 and PD. 6 Once POE-E201 detects the existence of an IEEE 802.3at/802.
6. Customer Support Thank you for purchasing PLANET products. You can browse our online FAQ resource at the PLANET Web site first to check if it could solve your issue. If you need more support information, please contact PLANET switch support team. PLANET online FAQ : http://www.planet.com.tw/en/support/faq.php?type=2 Switch support team mail address : support_switch@planet.com.tw Copyright © PLANET Technology Corp. 2013. Contents are subject to revision without prior notice.
EC Declaration of Conformity For the following equipment: *Type of Product : Single-Port 10/100/1000Mbps Ultra PoE Injector (60 Watts) *Model Number : POE-171 Single-Port 10/100/1000Mbps Ultra PoE Splitter (12V/19V/24V) POE-171S * Produced by: Manufacturer‘s Name : Manufacturer‘s Address: PLANET Technology Corp. 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.).
