User's Manual

- 9 -
- 10 -
- 11 -
3. [802.3at PoE+ Splitter]
 Connect the UTP cable in the package from the
“Ethernet” port of the 802.3at PoE+ Splitter to the
RJ45 port of a remote device.
 Properly adjust the DC power output and connect the DC
plug from the “DC OUT” of the 802.3at PoE+ Splitter to
the remote device.
802.3at
PoE+ Splitter
Switch
802.3at PoE+
Injector
100 meters
Power
Data
Power
Data
PoE
Power
Data
AC
DC
1000BASE-T UTP
PoE
1000BASE-T UTP with PoE
Power Line (AC)
AC
DC
Power Line (DC)
POE-161S (Power 5V/12V)
POE-162S (Power 24V/12V)
5V 12V
Incorrect voltage might
cause device damage
CAUTION
24V 12V
Incorrect voltage might
cause device damage
CAUTION
PTZ Speed
Dome
Figure 4: 802.3at PoE+ Injector and 802.3at PoE+ Splitter Architecture
Note
Please ensure the 802.3at PoE+ Splitter output
voltage is correct before supplying power to a
remote device; otherwise, it may damage the
remote device.
Standards Conformance
IEEE 802.3 10BASE-T
Ethernet
 
IEEE 802.3u
100BASE-TX Fast
Ethernet
 
IEEE 802.3ab
1000BASE-T Gigabit
Ethernet
 
IEEE 802.3af Power
over Ethernet
 
IEEE 802.3at Power
over Ethernet Plus
 
Regulatory
Compliance
FCC Part 15 Class A, CE
Environment
Operating
Temperature
0 ~ 50 degrees C
Storage Temperature -10 ~ 70 degrees C
Humidity 5 ~ 95% (non-condensing)
6 ProductSpecications
Product POE-161S POE-162S
Hardware Specications
Hardware Version 3 2
Interface
“Data” Output Port: 1 x RJ45 STP
“PoE (Data + Power)” Input Port:
1 x RJ45 STP
DC Out Plug Connector: 1
LED Indicator System: PoE-in-Use x 1 (Green)
Network Cable UTP Cat. 5/5e/6, up to 100m (328ft)
Data Rate 10/100/1000Mbps
Dimensions
(W x D x H)
95 x 70 x 25 mm 95 x 70 x 25 mm
Weight 108g 111g
Power over Ethernet
PoE Standard IEEE 802.3at/af Power over Ethernet/PD
PoE Power Input IEEE 802.3at 52~56V DC
DIP Switch
5V/12V DC output
voltage
12V/24V DC output
voltage
Number of Devices
that can be powered
1 1
PLANET TECHNOLOGY CORPORATION
e-mail: [e-mail] http://www.planet.com.tw
10F., No.96, Minquan Rd., Xindian Dist., New Taipei City, Taiwan, R.O.C. Tel:[phone] Fax:[phone]
EC Declaration of Conformity
For the following equipment:
*Type of Product : IEEE 802.3at Gigabit High Power over Ethernet Splitter
*Model Number : POE-161S, POE-162S
* Produced by:
Manufacturer‘s Name : PLANET Technology Corp.
Manufacturer‘s Address: 10F., No.96, Minquan Rd., Xindian Dist.,
New Taipei City 231, Taiwan, R.O.C.
is herewith confirmed to comply with the requirements set out in the Council Directive on the
Approximation of the Laws of the Member States relating to Electromagnetic Compatibility
Directive on (2014/30/EU).
For the evaluation regarding the EMC, the following standards were applied:
EN 55032 (2015 + AC:2016)
EN 55024 (2010 + A1:2015)
EN 55035 (2017)
Responsible for marking this declaration if the:
 Manufacturer  Authorized representative established within the EU
Authorized representative established within the EU (if applicable):
Company Name: Planet Technology Corp.
Company Address: 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan,
R.O.C.
Person responsible for making this declaration
Name, Surname Kent Kang
Position / Title : Director
Taiwan Nov. 1, 2018
Place Date Legal Signature