User's Manual

1-3

English

5. Hardware Installation

This section describes the hardware features of 802.3at PoE+

Splitter. Before connecting any network device to the 802.3at PoE+

Splitter,refertothischaptercarefully.

5.1 Before Installation

PLANET 802.3at PoE+ Splitter separates the power out and provides

two kinds of DC power output through its DIP switch and its voltage

and current are shown below:

Model

POE-161S POE-162S

DC Out Ethernet

5V 12V

Incorrect voltage might

cause device damage

CAUTION

DC Out Ethernet

24V 12V

Incorrect voltage might

cause device damage

CAUTION

DIP Switch for DC

Voltage Output

5V DC/4.5A

12V DC/2A

24V DC/1A

Default Mode 5V DC 12V DC

Note

DC Receptacle 2.5mm

2.5mm

The diameter of the hole of the

802.3at PoE+ Splitter’s DC plug

connector measures 2.5mm.

The POE-161S and POE-162S

provide 5V/12V and 12V/24V DC

power output through DIP switch

setting,respectively.

Note

PLANET 802.3at PoE+ Splitter and PLANET 802.3at

PoE+ Injector (e.g. POE-161, POE-163 and POE-164)

can be installed in pair. Use of third-party 802.3at

PoE+ Injector device is allowed if the device complies

with IEEE 802.3at standard.