Datasheet

POE-1200G
2
Quick and Easy PoE Network Deployment
The POE-1200G is installed between a regular Ethernet Switch and the PDs. There are totally 24 RJ45 STP ports on the front panel of the POE-1200G, of
which the 12 ports are on the lower stack functioned as "Data input" while the other 12 ports are on the upper stack functioned as "PoE (Data and Power)
output". Both power and data are transferred simultaneously over the UTP cables to PDs without affecting the existing network performance and functions.
Gigabit 802.3at PoE+ Managed Injector Hub
Non-PoE Switch
POE-1200G
100~240V AC
or
UPS
802.3at PoE PTZ /
Speed Dome IP Camera
802.3at PoE Multi-Channel /
High Power Wireless AP
802.3at PoE Splitter +
Non-PoE Device
802.3af PoE
IP Camera
30W
a
N
30W 30W 15W
802.3at
PoE Splitter
DC
PoE PoE
PoE PoE
Power
Data
Power
Data
Power
Data
Data Uplink
With data and Power over Ethernet from one unit, the POE-1200G can reduce power cable deployment and eliminate the need for dedicated electrical outlets
on the wall, ceiling or any unreachable place.
IEEE 802.3at PoE+ Standard Compliance
The PoE in-line power adopting the IEEE 802.3at Power over Ethernet Plus standard makes the POE-1200G able to deliver per port up to 36 watts of
power to each remote PoE compliant PD. It possesses double amount of power capability than the conventional 802.3af PoE and is an ideal solution to
satisfy the growing demand for higher power consuming network PDs, such as PTZ (pan, tilt and zoom), speed dome network cameras, color touch-screen or
video and voice over IP (VoIP) telephones, multi-channel 802.11ac wireless LAN access points, and other network devices.
POE-1200G
30W
802.3at
802.3af
15W
PTZ / Speed Dome Camera
IP Camera
30W