User's Manual

H.265 25-ch 4K Network Video Recorde with 16-Port PoE
NVR-2500 Series
201
6.5 Configuration
6.5.1 Local Config
In the main interface, click "Configuration →Local Config→Local Config" to
enter the local configuration interface, as shown in Figure 6-5 below. Here
you can set the device video file, capture and clip corresponding to the local
computer's save path, click "Browse" to select the path to save, click "Save"
to complete the path settings.
Figure 6-5
6.5.2 Camera
6.5.2.1 Add Camera
 Add Camera
In the main interface, click "Configuration → Camera →Add Camera" to enter
the add camera interface, as shown in Figure 6-6 below. Here you can add,
edit, and delete devices to the device as needed. The relevant parameters
are consistent with the NVR-side settings.
Figure 6-6