User's Manual
Table Of Contents
- Copyright
- Declaration
- Contents
- Chapter 1 Outlines and Features
- Chapter 2 NVR Appearance
- Chapter 3 Connecting NVR
- Chapter 4 NVR Startup
- Chapter 5 NVR Menu
- Chapter 6 Web Operation
- 6.1 Internet connection
- 6.2 Browser Login
- 6.3 Active X download, installation
- 6.4 Live View
- 6.5 Configuration
- 6.5.1 Local Config
- 6.5.2 Camera
- 6.5.3 Storage
- 6.5.3.1 Channel Recording
- Step 1: In the main interface, click "Configuration → Storage→ Channel Recording" to enter the recording setting interface, as shown in Figure 6-14 below.
- Figure 6-14
- Step 2: Set parameters, see the table below.
- Table 6-1
- Step 3: Click "Save" to complete configuration.
- Encode
- In the main interface, click "Configuration →Record →Encode" to enter the encoding setting interface, as shown in Figure 6-15 below. Here you can view and set the encoding parameter values for accessing the IPC. The relevant parameters and NVR-side se...
- Figure 6-15
- 6.5.3.2 Storage Manage
- HDD
- In the main interface, click "Configuration →Storage →Storage Manage" to enter the HDD interface, as shown in Figure 6-16 below. Here you can view the HDD information of the connected device and format the hard disk. The operation steps of formatting ...
- Figure 6-16
- Cloud Storage
- In the main interface, click "Configuration →System →Network →Cloud Storage" to enter Cloud Storage and IPEYE setting interface, as shown in Figure 6-17 below. Here you could enable and set the function of Cloud Storage and IPEYE, the specific setting...
- Figure 6-17
- 6.5.4 System
- 6.5.5 Maintain
- 6.6 Playback
- 6.7 Picture
- Chapter 7 Appendix
H.265 25-ch 4K Network Video Recorde with 16-Port PoE
NVR-2500 Series
163
Steps 5: Click "Apply" to save the setting.
Face Database List: Used to display and configure all face database of
the current device.
Database Name: To display the name of database.
Mode: To display the type of database, blacklist or whitelist.
Similarity: The similarity between the face recognized by the device and
the face stored in the face database.
: Editing, used to set the similarity and mode of the corresponding
face database. The higher the similarity value, the more the captured
face image looks like the face stored in the face database, and the more
accurate the face recognition in the face database. However, the fewer
comparison results are displayed.
The first channel of some NVRs supports the face
comparison function. The channels can be connected
to ICA-Ax280 model and IPC accessed through any
protocol.
Crossover
Line crossing detection can detect whether there is an object crossing the set
warning surface in the video, and perform linkage alarm according to the
judgment result.
The specific operation steps are as follows:
Step 1: In the main menu, choose "
→Smart Event" to enter Smart
Event setting interface.
Step 2: Choose the channel you need to set the line crossing detection, click
"Crossover" to enter line crossing detection setting mode, as shown in Figure
5-68 ○1 below.