User's Manual
Table Of Contents
- Copyright
- Declaration
- Contents
- Chapter 1 Outlines and Features
- Chapter 2 NVR Appearance
- Chapter 3 Connecting NVR
- Chapter 4 NVR Startup
- Chapter 5 NVR Menu
- Chapter 6 Web Operation
- 6.1 Internet connection
- 6.2 Browser Login
- 6.3 Active X download, installation
- 6.4 Live View
- 6.5 Configuration
- 6.5.1 Local Config
- 6.5.2 Camera
- 6.5.3 Storage
- 6.5.3.1 Channel Recording
- Step 1: In the main interface, click "Configuration → Storage→ Channel Recording" to enter the recording setting interface, as shown in Figure 6-14 below.
- Figure 6-14
- Step 2: Set parameters, see the table below.
- Table 6-1
- Step 3: Click "Save" to complete configuration.
- Encode
- In the main interface, click "Configuration →Record →Encode" to enter the encoding setting interface, as shown in Figure 6-15 below. Here you can view and set the encoding parameter values for accessing the IPC. The relevant parameters and NVR-side se...
- Figure 6-15
- 6.5.3.2 Storage Manage
- HDD
- In the main interface, click "Configuration →Storage →Storage Manage" to enter the HDD interface, as shown in Figure 6-16 below. Here you can view the HDD information of the connected device and format the hard disk. The operation steps of formatting ...
- Figure 6-16
- Cloud Storage
- In the main interface, click "Configuration →System →Network →Cloud Storage" to enter Cloud Storage and IPEYE setting interface, as shown in Figure 6-17 below. Here you could enable and set the function of Cloud Storage and IPEYE, the specific setting...
- Figure 6-17
- 6.5.4 System
- 6.5.5 Maintain
- 6.6 Playback
- 6.7 Picture
- Chapter 7 Appendix
H.265 25-ch 4K Network Video Recorde with 16-Port PoE
NVR-2500 Series
96
Figure 5-34 ○2
Preset No.: Select preset points.
Stay Time: Stay time on the Preset.
Speed: Speed for Cruise.
Cruise On: After clicking, the device cruises according to the selected
cruise route.
Del Cruise: Select the cruise line, click to "Del Cruise", and complete the
cruise line to remove.
Del All Cruise: After clicking, delete all the set cruise lines.
The NVR supports up to 256 preset points, but the actual
number of preset positions is limited by the number of preset
points that can be set by the camera. The maximum number
of preset points supported by different PTZs is not necessarily
the same.
Some NVRs support the setting of dome or pan/tilt
parameters for analog channels. Before controlling the dome
or pan/tilt, please confirm that the RS-485 control line
between the pan/tilt decoder and the hard disk video
recorder is connected correctly, and configure the parameters
of the pan/tilt decoder in the device.