User's Manual
Table Of Contents
- Copyright
- Declaration
- Contents
- Chapter 1 Outlines and Features
- Chapter 2 NVR Appearance
- Chapter 3 Connecting NVR
- Chapter 4 NVR Startup
- Chapter 5 NVR Menu
- Chapter 6 Web Operation
- 6.1 Internet connection
- 6.2 Browser Login
- 6.3 Active X download, installation
- 6.4 Live View
- 6.5 Configuration
- 6.5.1 Local Config
- 6.5.2 Camera
- 6.5.3 Storage
- 6.5.3.1 Channel Recording
- Step 1: In the main interface, click "Configuration → Storage→ Channel Recording" to enter the recording setting interface, as shown in Figure 6-14 below.
- Figure 6-14
- Step 2: Set parameters, see the table below.
- Table 6-1
- Step 3: Click "Save" to complete configuration.
- Encode
- In the main interface, click "Configuration →Record →Encode" to enter the encoding setting interface, as shown in Figure 6-15 below. Here you can view and set the encoding parameter values for accessing the IPC. The relevant parameters and NVR-side se...
- Figure 6-15
- 6.5.3.2 Storage Manage
- HDD
- In the main interface, click "Configuration →Storage →Storage Manage" to enter the HDD interface, as shown in Figure 6-16 below. Here you can view the HDD information of the connected device and format the hard disk. The operation steps of formatting ...
- Figure 6-16
- Cloud Storage
- In the main interface, click "Configuration →System →Network →Cloud Storage" to enter Cloud Storage and IPEYE setting interface, as shown in Figure 6-17 below. Here you could enable and set the function of Cloud Storage and IPEYE, the specific setting...
- Figure 6-17
- 6.5.4 System
- 6.5.5 Maintain
- 6.6 Playback
- 6.7 Picture
- Chapter 7 Appendix
H.265 25-ch 4K Network Video Recorde with 16-Port PoE
NVR-2500 Series
81
5.3.5 Channel
The channel is composed of Device and Encode Parameters, and can operate
Camera, POE, OSD, Image, PTZ, Privacy, Change Name and Main / Sub Stream
on NVR.
5.3.5.1 Camera
After adding a remote device, you can view the video screen of the remote
device directly on the NVR, and perform operations such as storage and
management. Different devices support different numbers of remote devices.
You can add required remote devices based on actual conditions.
Prerequisites:
Before adding the device, please confirm whether the IP camera has been
connected to the network where the NVR is located and set its network
parameters correctly.
NOTE!
The device may face network security problems when it is connected to
the Internet. Please strengthen the protection of personal information
and data. When you find that the device may have hidden network
security risks, please contact us in time. It is recommended that you
conduct a periodic network security assessment of the device. Our
company can provide corresponding professional technical services.
Please understand that you are responsible for properly configuring all
passwords and other related product security settings, and keeping your
username and password properly.