User's Manual
Table Of Contents
- Copyright
- Declaration
- Contents
- Chapter 1 Outlines and Features
- Chapter 2 NVR Appearance
- Chapter 3 Connecting NVR
- Chapter 4 NVR Startup
- Chapter 5 NVR Menu
- Chapter 6 Web Operation
- 6.1 Internet connection
- 6.2 Browser Login
- 6.3 Active X download, installation
- 6.4 Live View
- 6.5 Configuration
- 6.5.1 Local Config
- 6.5.2 Camera
- 6.5.3 Storage
- 6.5.3.1 Channel Recording
- Step 1: In the main interface, click "Configuration → Storage→ Channel Recording" to enter the recording setting interface, as shown in Figure 6-14 below.
- Figure 6-14
- Step 2: Set parameters, see the table below.
- Table 6-1
- Step 3: Click "Save" to complete configuration.
- Encode
- In the main interface, click "Configuration →Record →Encode" to enter the encoding setting interface, as shown in Figure 6-15 below. Here you can view and set the encoding parameter values for accessing the IPC. The relevant parameters and NVR-side se...
- Figure 6-15
- 6.5.3.2 Storage Manage
- HDD
- In the main interface, click "Configuration →Storage →Storage Manage" to enter the HDD interface, as shown in Figure 6-16 below. Here you can view the HDD information of the connected device and format the hard disk. The operation steps of formatting ...
- Figure 6-16
- Cloud Storage
- In the main interface, click "Configuration →System →Network →Cloud Storage" to enter Cloud Storage and IPEYE setting interface, as shown in Figure 6-17 below. Here you could enable and set the function of Cloud Storage and IPEYE, the specific setting...
- Figure 6-17
- 6.5.4 System
- 6.5.5 Maintain
- 6.6 Playback
- 6.7 Picture
- Chapter 7 Appendix
H.265 25-ch 4K Network Video Recorde with 16-Port PoE
NVR-2500 Series
33
Search: Click to search all online IP devices in the LAN according to the
protocol in the "Filter" box.
Add: Add selected device.
Manual Add: For details on how to manually enter device information,
see 5.3.5.1.
Filter: Select the display filter conditions and click "Search", the device
searches and displays all IPCs in the LAN that meets the conditions.
Filter Search Add Device: In the Add Device interface,
select the corresponding protocol in the "Filter"
column →"Search" →Select Device → Click "
".
Manual Add: On the Device Search interface, click
"Manual add" → Click "Enable"→ Select Protocol,
Enter Password, IP, Port → click "Save".
4.5 Channel shortcut menu
After adding a device to a channel, click the channel. The shortcut menu
appears as shown in Figure 4-10.
Figure 4-10
The function of each icon is shown in the following table:
Icon
Function
Manual capture -- click the button to capture the current video
pictures. Search, view and backup pictures can be carried out in
" File Management" → "All Files".
Instant playback button -- click the button, and the channel will
play back for 5 minutes before the video.
PTZ -- click into the PTZ interface
Audio output control button -- click to set the channel output
volume and mute.