User's Manual
Table Of Contents
- Copyright
- Declaration
- Contents
- Chapter 1 Outlines and Features
- Chapter 2 NVR Appearance
- Chapter 3 Connecting NVR
- Chapter 4 NVR Startup
- Chapter 5 NVR Menu
- Chapter 6 Web Operation
- 6.1 Internet connection
- 6.2 Browser Login
- 6.3 Active X download, installation
- 6.4 Live View
- 6.5 Configuration
- 6.5.1 Local Config
- 6.5.2 Camera
- 6.5.3 Storage
- 6.5.3.1 Channel Recording
- Step 1: In the main interface, click "Configuration → Storage→ Channel Recording" to enter the recording setting interface, as shown in Figure 6-14 below.
- Figure 6-14
- Step 2: Set parameters, see the table below.
- Table 6-1
- Step 3: Click "Save" to complete configuration.
- Encode
- In the main interface, click "Configuration →Record →Encode" to enter the encoding setting interface, as shown in Figure 6-15 below. Here you can view and set the encoding parameter values for accessing the IPC. The relevant parameters and NVR-side se...
- Figure 6-15
- 6.5.3.2 Storage Manage
- HDD
- In the main interface, click "Configuration →Storage →Storage Manage" to enter the HDD interface, as shown in Figure 6-16 below. Here you can view the HDD information of the connected device and format the hard disk. The operation steps of formatting ...
- Figure 6-16
- Cloud Storage
- In the main interface, click "Configuration →System →Network →Cloud Storage" to enter Cloud Storage and IPEYE setting interface, as shown in Figure 6-17 below. Here you could enable and set the function of Cloud Storage and IPEYE, the specific setting...
- Figure 6-17
- 6.5.4 System
- 6.5.5 Maintain
- 6.6 Playback
- 6.7 Picture
- Chapter 7 Appendix
H.265 25-ch 4K Network Video Recorde with 16-Port PoE
NVR-2500 Series
241
Step 2: Select the channel, click "OK", select the event type, and set the
search time range.
Step 3: Click "
", the searched image is displayed on the right
side of the interface.
Step 4: Select the picture, click "Download" to select the storage path, click
"Ok", select the image to download to the specified folder. Click on the
"
" corresponding to the preview position to view the image.
Channel: Select the channel to which you want to search for image files.
You can select one channel individually or multiple channels or "Select
All" at the same time.
Event Type: Capture image type, the drop-down box option consists of
All, Manual capture, Motion capture, Face detection, Regional Intrusion,
Crossover, Wandering and Staff Gathering.
Start/End Time: The time range for capturing image files.
Query: Click "
", the system will query the corresponding
picture file according to the set channel, event type and time range, and
display it in the file list.
Details: The image searched by clicking "
" is displayed in the list as
detailed information, as shown in Figure 6-51 below:
Figure 6-51