User's Manual
Table Of Contents
- Copyright
- Declaration
- Contents
- Chapter 1 Outlines and Features
- Chapter 2 NVR Appearance
- Chapter 3 Connecting NVR
- Chapter 4 NVR Startup
- Chapter 5 NVR Menu
- Chapter 6 Web Operation
- 6.1 Internet connection
- 6.2 Browser Login
- 6.3 Active X download, installation
- 6.4 Live View
- 6.5 Configuration
- 6.5.1 Local Config
- 6.5.2 Camera
- 6.5.3 Storage
- 6.5.3.1 Channel Recording
- Step 1: In the main interface, click "Configuration → Storage→ Channel Recording" to enter the recording setting interface, as shown in Figure 6-14 below.
- Figure 6-14
- Step 2: Set parameters, see the table below.
- Table 6-1
- Step 3: Click "Save" to complete configuration.
- Encode
- In the main interface, click "Configuration →Record →Encode" to enter the encoding setting interface, as shown in Figure 6-15 below. Here you can view and set the encoding parameter values for accessing the IPC. The relevant parameters and NVR-side se...
- Figure 6-15
- 6.5.3.2 Storage Manage
- HDD
- In the main interface, click "Configuration →Storage →Storage Manage" to enter the HDD interface, as shown in Figure 6-16 below. Here you can view the HDD information of the connected device and format the hard disk. The operation steps of formatting ...
- Figure 6-16
- Cloud Storage
- In the main interface, click "Configuration →System →Network →Cloud Storage" to enter Cloud Storage and IPEYE setting interface, as shown in Figure 6-17 below. Here you could enable and set the function of Cloud Storage and IPEYE, the specific setting...
- Figure 6-17
- 6.5.4 System
- 6.5.5 Maintain
- 6.6 Playback
- 6.7 Picture
- Chapter 7 Appendix
H.265 25-ch 4K Network Video Recorde with 16-Port PoE
NVR-2500 Series
182
Query: Search logs by setting search criteria and display them in the log
list.
Prev Page /Next Page: Page turning function, when there are many logs
in the query period, click to view other log information.
Clear: Clear all the information for the log.
Export/Import
If multiple devices need to adopt the same configuration, one device can be
configured first, and the configuration file of the device can be "exported"
and backed up, and then through the "import" operation, the configuration
can be applied to other devices to save more Configure the time.
The specific operation steps are as follows:
Step 1: In the main menu, choose"
→Export/Import" to enter
export/import interface, as shown in Figure 5-82 below.
Figure 5-82
Step 2: Export/ import the configuration files.
Config Export: Insert U disk into NVR, click "Config Export" and
wait for the export progress to complete, click "Confirm".
Config Import: Insert the U disk that stores the configuration file
into the NVR, click "Config Import → Confirm" and wait for the
import progress to complete, the device will restart.