User's Manual
Table Of Contents
- Copyright
- Declaration
- Contents
- Chapter 1 Outlines and Features
- Chapter 2 NVR Appearance
- Chapter 3 Connecting NVR
- Chapter 4 NVR Startup
- Chapter 5 NVR Menu
- Chapter 6 Web Operation
- 6.1 Internet connection
- 6.2 Browser Login
- 6.3 Active X download, installation
- 6.4 Live View
- 6.5 Configuration
- 6.5.1 Local Config
- 6.5.2 Camera
- 6.5.3 Storage
- 6.5.3.1 Channel Recording
- Step 1: In the main interface, click "Configuration → Storage→ Channel Recording" to enter the recording setting interface, as shown in Figure 6-14 below.
- Figure 6-14
- Step 2: Set parameters, see the table below.
- Table 6-1
- Step 3: Click "Save" to complete configuration.
- Encode
- In the main interface, click "Configuration →Record →Encode" to enter the encoding setting interface, as shown in Figure 6-15 below. Here you can view and set the encoding parameter values for accessing the IPC. The relevant parameters and NVR-side se...
- Figure 6-15
- 6.5.3.2 Storage Manage
- HDD
- In the main interface, click "Configuration →Storage →Storage Manage" to enter the HDD interface, as shown in Figure 6-16 below. Here you can view the HDD information of the connected device and format the hard disk. The operation steps of formatting ...
- Figure 6-16
- Cloud Storage
- In the main interface, click "Configuration →System →Network →Cloud Storage" to enter Cloud Storage and IPEYE setting interface, as shown in Figure 6-17 below. Here you could enable and set the function of Cloud Storage and IPEYE, the specific setting...
- Figure 6-17
- 6.5.4 System
- 6.5.5 Maintain
- 6.6 Playback
- 6.7 Picture
- Chapter 7 Appendix
H.265 25-ch 4K Network Video Recorde with 16-Port PoE
NVR-2500 Series
138
Step 4: Enter the new user information (user name, password, confirm
password), select the level, click "Save".
Step 5: Setting permissions.
Select the successfully added user, click the corresponding "
" button
below the permission to enter the permission interface, and set the user
permission.
Authority NOTE
Authority are divided into local configuration, remote configuration, channel
configuration, administrator users can enable / disable corresponding
permissions as needed.
Local Config
Local Param Setup: set parameters, restore default parameters,
import / export parameters.
Local Channel Setup: Add, delete, modify, import and export
configuration files for the IP channel.
Local User: Check the User Management interface.
Local Disk: View and set recording plans, format storage devices.
Local Log: View system logs, system information.
Local Update: Upgrade the device locally.
Local Restore Default: you could restore default parameters.
Local Shutdown Reboot: You can shut down and reboot the device.
Remote Config
Remote Param Setup: Set parameters remotely, restore default
parameters, import / export parameters.
Remote Channel Setup: Add, delete, modify IP channels remotely.
Remote User: View the User interface remotely.
Remote Disk: View and set recording plans, format storage devices
remotely.
Remote Log: View system logs remotely.
Remote Update: Upgrade the device on the web.
Remote Restore Default: you could restore default parameters
remotely.