User's Manual
Table Of Contents
- Copyright
- Declaration
- Contents
- Chapter 1 Outlines and Features
- Chapter 2 NVR Appearance
- Chapter 3 Connecting NVR
- Chapter 4 NVR Startup
- Chapter 5 NVR Menu
- Chapter 6 Web Operation
- 6.1 Internet connection
- 6.2 Browser Login
- 6.3 Active X download, installation
- 6.4 Live View
- 6.5 Configuration
- 6.5.1 Local Config
- 6.5.2 Camera
- 6.5.3 Storage
- 6.5.3.1 Channel Recording
- Step 1: In the main interface, click "Configuration → Storage→ Channel Recording" to enter the recording setting interface, as shown in Figure 6-14 below.
- Figure 6-14
- Step 2: Set parameters, see the table below.
- Table 6-1
- Step 3: Click "Save" to complete configuration.
- Encode
- In the main interface, click "Configuration →Record →Encode" to enter the encoding setting interface, as shown in Figure 6-15 below. Here you can view and set the encoding parameter values for accessing the IPC. The relevant parameters and NVR-side se...
- Figure 6-15
- 6.5.3.2 Storage Manage
- HDD
- In the main interface, click "Configuration →Storage →Storage Manage" to enter the HDD interface, as shown in Figure 6-16 below. Here you can view the HDD information of the connected device and format the hard disk. The operation steps of formatting ...
- Figure 6-16
- Cloud Storage
- In the main interface, click "Configuration →System →Network →Cloud Storage" to enter Cloud Storage and IPEYE setting interface, as shown in Figure 6-17 below. Here you could enable and set the function of Cloud Storage and IPEYE, the specific setting...
- Figure 6-17
- 6.5.4 System
- 6.5.5 Maintain
- 6.6 Playback
- 6.7 Picture
- Chapter 7 Appendix
H.265 25-ch 4K Network Video Recorde with 16-Port PoE
NVR-2500 Series
126
Whitelist:
1. The device can only connect to the IPC in white list.
2. Only IPCs in the whitelist can access the NVR.
Add blacklist / Whitelist operation steps are shown as below:
Step 1: In the main menu, choose"
→Address Filter" to enter Address
Filter setting interface, as shown in Figure 5-49 below.
Figure 5-49
Step 2: Choose "Restriction Type ", such as "Blacklist ".
Step 3: Click "Add ", choose IP address (or MAC address), input IP address.
Step 4: Click "Apply", the IP address or MAC address will be added to the
Blacklist of the device.
IP address and MAC address filtering steps:
Step 1: In the main menu, choose"
→Address Filter" to enter Address
Filter setting interface.
Steps 2: Choose "enable→Restriction Type".
Steps 3: Click "Apply" to save the setting.
Enable: Enable / Disable the filtering function of NVR.