User's Manual
Table Of Contents
- Copyright
- Declaration
- Contents
- Chapter 1 Outlines and Features
- Chapter 2 NVR Appearance
- Chapter 3 Connecting NVR
- Chapter 4 NVR Startup
- Chapter 5 NVR Menu
- Chapter 6 Web Operation
- 6.1 Internet connection
- 6.2 Browser Login
- 6.3 Active X download, installation
- 6.4 Live View
- 6.5 Configuration
- 6.5.1 Local Config
- 6.5.2 Camera
- 6.5.3 Storage
- 6.5.3.1 Channel Recording
- Step 1: In the main interface, click "Configuration → Storage→ Channel Recording" to enter the recording setting interface, as shown in Figure 6-14 below.
- Figure 6-14
- Step 2: Set parameters, see the table below.
- Table 6-1
- Step 3: Click "Save" to complete configuration.
- Encode
- In the main interface, click "Configuration →Record →Encode" to enter the encoding setting interface, as shown in Figure 6-15 below. Here you can view and set the encoding parameter values for accessing the IPC. The relevant parameters and NVR-side se...
- Figure 6-15
- 6.5.3.2 Storage Manage
- HDD
- In the main interface, click "Configuration →Storage →Storage Manage" to enter the HDD interface, as shown in Figure 6-16 below. Here you can view the HDD information of the connected device and format the hard disk. The operation steps of formatting ...
- Figure 6-16
- Cloud Storage
- In the main interface, click "Configuration →System →Network →Cloud Storage" to enter Cloud Storage and IPEYE setting interface, as shown in Figure 6-17 below. Here you could enable and set the function of Cloud Storage and IPEYE, the specific setting...
- Figure 6-17
- 6.5.4 System
- 6.5.5 Maintain
- 6.6 Playback
- 6.7 Picture
- Chapter 7 Appendix
H.265 25-ch 4K Network Video Recorde with 16-Port PoE
NVR-2500 Series
116
Figure 5-43
Steps 2: Configure IP Address, Network Mask, Gateway, Primary DNS and
other related network parameters.
Steps 3: Click "Apply" to save the setting.
IP Address: Enter the IP address of NVR.
Enable DHCP: Enable / disable DHCP (Dynamic Host Configuration
Protocol) function. "IP Address", "Network Mask", and "Gateway"
cannot be set when DHCP is enabled.
Network Mask: According to the actual situation set.
Gateway: According to the actual situation set, with the IP address in
the same network segment.
Primary DNS: This is the DNS server IP address, which is usually
provided by the local access point service provider (ISP). Enter the IP
address of your domain name server here.
Secondary DNS: Start secondary DNS when the primary one does not
work.
MAC Address: Displays the physical address of the NVR.
TCP Port: Default value is 5000, according to the actual needs of users
to set the port.