Quick Guide

10
3. Deployed Devices Monitored via NMS-360V Controller
Prior installation
The NMS-360V is used to centrally manage a large number of BSP-360s(V2).
Therefore,youneed toupgradetheBSP-360(V2)rmwarebeforeusingNMS-360V.
Please download and use the latest BSP-360(V2) rmware from the website so
that setting can be completed smoothly.
The NMS-360V incorporated in a workstation or PC can monitor the BSP-360s
compliant with the MQTT Protocol, SNMP Protocol, ONVIF Protocol and
PLANET Smart Discovery utility.
Follow the steps below to set up the NMS-360V and BSP-360(V2) accordingly.
Step 1. Connect the devices, NMS-360V Controller and your computer, to the
same network.
PC / Workstation with
Web Browser 192.168.1.x
192.168.1.x
Managed AP
IP Camera
192.168.1.x
PoE
PoE
NMS-360V
Default IP: 192.168.1.100
BSP-360
192.168.1.x
Step 2. BSP-360: Log in to the Switch’s Web User Interface and enable the
SNMP and NMS controller functions.

