Datasheet

ManualsBrandsPLANET Technology ManualsNMS ControllerRenewable Energy Management Controller with LCD Touch Screen (10"/12")

NMS-360V

Intelligent Renewable Energy Management Controller

PLANET NMS-360V Renewable Energy Management Controller can automatically

detect up to 512 remote devices powered by PLANET BSP-360 Industrial

Renewable Power Unit in ways that solar PV, battery and PoE port usage are

recorded. Besides, traffic logs that are compliant with SNMP, MQTT Protocol

and PLANET Smart Discovery utility are managed. It thus enables administrator

to centrally manage a network of up to 512 nodes from a central office, greatly

boosting network and power management efciency. Moreover, the NMS-360V can

support up to 2,048 PLANET IP cameras where snapshots are taken through the

ONVIF Protocol.

Renewable Energy Management Controller with LCD

Touch Screen (10”/12”)

Industrial-grade Physical Hardware

• 2x10/100/1000BASE-T Gigabit Ethernet RJ45 ports

• 2xUSB 3.0 ports for conguration backup and restoration

• 1 x audio line out (reserve)

• 1 x HDMI interface

• 2 x DB-9 COM1,COM2 (reserved)

• 1 x 3-pin DC power input terminal

• 1 x 2-pin connector for power on/off button (reserved)

• VESA (100 x 100) panel mount

BSP-360 Management

• Dashboard: Providing the at-a-glance view of system,

power, trafc, system statistics and device event statuses

• DeviceList:Providingdevicesstatusoverviewand

managedfunction

• SetupWizard:Easy-to-use step-by-step guidance

• NodeDiscovery:Management is carried out once a BSP-

360-powered device is detected.

• App-likeDeviceViewing:App-like devices that are

compliant with SNMP, MQTT, and Smart Discovery

• EventTable:The status of system can be reported via

event alarm

• AlarmSystem:E-mail alerts for the administrator via the

SMTP server

• DeviceProvisioning:Enabling BSP-360 to be congured

and upgraded at the same time

• SiteMap: Real-time site map of BSP-360 and IP cams on

the user-dened map to optimize energy deployment

• RemotePoEcontrol:Real-time remote PoE on/off to

reboot connected devices

• UserControl:Allowing on-demand account creation and

user-dened access policy

• Scalability:Free system upgrade and BSP-360 rmware

bulk upgrade capability

• MaximumScalability:1 site map, 512 nodes, 2048

managed IP cameras.

Network Management Characteristics

• Built-in DHCP Server

• SSL secure access

• Web-based GUI management interface

• SNMP v1, v2c, and v3 management

• Supports PLANET DDNS/Easy DDNS

Watch Over Energy Usage Level, and System and Device Events within

Minutes

The home page displays the statuses of system and device events to oversee

whether or not they are within the threshold set by the administrator. This can help

the administrator quickly know whether the system is operating stably or not. The

system event function offers the on-time event statistics table and you can lter the

event device with one touch. The event devices section shows which devices are

low in energy, not working properly and off the line. A graph of the current energy

usage level and the green power utilization shows the power trafc statuses of the

selected devices. Thus, it enables you to have a valuable information on the current

energy statuses and other situations at a glance. With that, the administrator can

immediately address whatever problem these devices may have.

Summary of content (6 pages)

PAGE 1
NMS-360V Renewable Energy Management Controller with LCD Touch Screen (10”/12”) Industrial-grade Physical Hardware • 2x10/100/1000BASE-T Gigabit Ethernet RJ45 ports • 2xUSB 3.
PAGE 2
NMS-360V User-friendly Setup Wizard The NMS-360V enhances user experience by providing a more user-friendly setup wizard with a step-by-step guidance on how each related function is to be set. Just like an app, it reduces training time and allows even non-technical users to be able to set up management network system within minutes. Password Setup Wizard IP Configuration Configuration User Name Mode Password IP Address Retype Password Subnet Mask Static IP DHCP Device Num.
PAGE 3
NMS-360V Instant E-mail Alarm Function The NMS-360V e-mail alarm function is designed to send an email alert to the administrator via the SMTP server where syslog information can be found once an abnormality is detected. This can prompt the administrator to quickly fix the identified problem in the network. Optimizing Energy Deployment with Site Maps With the site maps, the BSP-360 can be located according to the field deployment, thus saving your time and cost of on-site support and monitoring.
PAGE 4
NMS-360V HDMI Screen Synchronization Projection and Remote Login The NMS-360V It supports HDMI interface that can easily connect to another bigger size screen, so that user can easy to monitor the network more clearly. It also can be operated from anywhere via Web browser to open more monitor screen that are able to access managed nodes on a DHCP-enabled network, thus controlling multiple devices through the other PC, laptop or tablet.
PAGE 5
NMS-360V Specifications Product NMS-360V-12 Form Factor Panel Mount, VESA 100 x 100 NMS-360V-10 Physical Specifications 2 10/100/1000BASE-T Gigabit Ethernet RJ45 ports 2 USB 3.0 ports (They cannot be used at the same time.) 1 Audio Line Out (reserved) I/O Interface 1 HDMI interface 2 DB-9 COM1,COM2 (reserved) 1 3-pin DC power input terminal 1 2-pin connector for power on/off button (reserved) Storage 2.5" 32G SATA3 HDD Touch LCD Size 12.1” TFT-LCD 10.
PAGE 6
NMS-360V Standards Conformance Regulatory Compliance CE, FCC IEEE 802.3 10BASE-T Standards Compliance IEEE 802.3u 100BASE-TX IEEE 802.3ab Gigabit 1000BASE-T IEEE 802.3x Flow control and back pressure Ordering Information NMS-360V-10 Renewable Energy Management Controller with 10" LCD Touch Screen NMS-360V-12 Renewable Energy Management Controller with 12" LCD Touch Screen Related Products BSP-360(V2) Industrial Renewable Power 5-Port Gigabit Managed Switch with 4-Port 802.