Quick Guide

4
2. Hardware Description
12V DC IN
LAN1~5 Ports
USB Port
Console Port
Reset Button
Power
Reset Button: < 5 sec: System reboot; > 5 sec: Factory default
2.1 HardwareInterfaceDenition
Interface Description
Power Switch Press the power switch to power on the device
DC IN DC jack power input 12V, 5A
Console Port
Connect PC through the RS232 to RJ45 serial cable (115200, 8,
N, 1) to enter the management interface
USB Port Connect the USB HDD to enable USB backup/restoration function
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
LAN Ports (1~5) 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
PWR LED Indicates that the device is powered on (Blue)
LAN LED
Link: Steady Green (Green)
Active: Flashing Green (Green)
Remarks: The console port is used for technology maintenance.
RJ45 LED Color Function
1000
LNK/ACT
Green
Lights
To indicate the port is successfully established at
1000Mbps.
Blinks
To indicate that the switch is actively sending or
receiving data over that port.
100
LNK/ACT
Orange
Lights
To indicate the port is successfully established at
100Mbps.
Blinks
To indicate that the switch is actively sending or
receiving data over that port.