Renewable Energy Management Controller NMS-360 Quick Installation Guide
Table of Contents 1. Package Contents........................................................................................ 3 2. Hardware Description................................................................................... 4 2.1 Hardware Interface Definition................................................................ 4 2.2 Physical Specifications........................................................................... 5 2.3 Product Features.................................................
1. Package Contents Thank you for purchasing PLANET Universal Network Management Controller. The description of the model is shown below: NMS-360 Renewable Energy Management Controller “NMS-360 Controller” is used as an alternative name in this Quick Installation Guide.
2. Hardware Description Power USB Port 12V DC IN Reset Button Console Port LAN1~5 Ports Reset Button: < 5 sec: System reboot; > 5 sec: Factory default 2.
2.2 Physical Specifications Dimensions (W x D x H) 232 x 153 x 44 mm Weight 1.
2.3 Product Features Dashboard Providing the at-a-glance view of system, power, traffic, system statistics and device event statuses. Device List Providing devices status overview and managed function Setup Wizard Easy-to-use step-by-step guidance. Node Discovery Management is carried out once a BSP-360-powered device is detected. App-like Device Viewing App-like devices that are compliant with SNMP, MQTT, and Smart Discovery. Event Table The status of system can be reported via event alarm.
Storage 8GB EMMC5.1, 15nm/2 eMLC Dimensions (W x D x H) 232 x 153 x 44 mm Weight 1.15 kg Enclosure Metal Power Requirement 60W adapter 12V 5A with DC jack AC 100~240V, 3~1.5A, 60~50Hz.
Remote PoE Control Real-time remote PoE on/off to reboot connected devices User Control Allowing on-demand account creation and userdefined access policy Scalability Free system upgrade and BSP-360 firmware bulk upgrade capability Maximum Scalability 1 site map, 512 nodes, 2048 managed IP cameras.
3. Deployed Devices Monitored via NMS-360 Controller Prior installation The NMS-360 is used to centrally manage a large number of BSP-360s(V2). Therefore, you need to upgrade the BSP-360(V2) firmware before using NMS-360. Please download and use the latest BSP-360(V2) firmware from the website so that setting can be completed smoothly. The NMS-360 incorporated in a workstation or PC can monitor the BSP-360s compliant with the MQTT Protocol, SNMP Protocol, ONVIF Protocol and PLANET Smart Discovery utility.
10
4. Wired Network Configuration A computer with wired Ethernet connection is required for the first-time configuration of the NMS-360 Controller. RJ45/UTP Cable NMS-360 IP Address: 192.168.1.100 PC / Workstation with Web Browser 192.168.1.x 1. Go to “Control Panel-> Network and Sharing Center-> Change Adapter Settings”. 2. Double-click “Local Area Connection”. 3. Select “Internet Protocol version 4 (TCP/IPv4)” and click “Properties”. 4.
5. Entering into the Web Management Default Default Default Default IP Address: 192.168.1.100 Management Port: 8888 Username: admin Password: admin Launch the Web browser (Google Chrome with seamless mode is recommended.) and enter the default IP address “https://192.168.1.100:8888”. Then, enter the default username and password shown above to log on to the system. * The secure login with SSL (HTTPS) prefix is required.
6. Setup Wizard 1. Account Modification: Set a new account and password for security. 2. IP Configuration Setting: Set the NMS-360’s IP into the same local network segment.
3. Devices Discovery: Search the managed devices and add to list. (Finish Wizard) 4.
Further Information The above steps introduce the simple installations and configurations of the NMS360 Controller. For further configurations of PLANET NMS-360, please refer to the user manual, which can be downloaded from the website. PLANET online FAQs: http://www.planet.com.tw/en/support/faq Support team mail address: support@planet.com.tw User’s Manual: https://www.planet.com.tw/en/product/nms-360 (Please select your model name from the Product Model drop-down menu.
