Datasheet
NMS-360
1
Renewable Energy Management Controller
Intelligent Renewable Energy Management Controller
PLANET NMS-360 Renewable Energy Management Controller can automatically
detect up to 512 remote devices powered by PLANET BSP-360 Industrial Renewable
Power Unit in ways that solar PV, battery and PoE port usage are recorded. Besides,
traffic logs that are compliant with SNMP, MQTT Protocol and PLANET Smart
Discovery utility are managed. It thus enables administrator to centrally manage a
network of up to 512 nodes from a central ofce, greatly boosting network and power
management efficiency. Moreover, the NMS-360 can support up to 2,048 PLANET
IP cameras to do snapshots through the ONVIF Protocol.
Industrial-grade Physical
• 5 10/100/1000BASE-T Gigabit Ethernet RJ45 ports
• RJ45 type console interface for basic management
• 2 USB 3.0 ports for conguration backup and restoration
• Desktop design for easy placement
BSP-360s Management
• Dashboard: Providing the at-a-glance view of system,
power, trafc, system statistics and device event statuses
• DeviceList:Providing devices status overview and
managed function
• SetupWizard:Easy to use step-by-step guidance
• NodeDiscovery:Management is carried out once a BSP-
360-powered device is detected.
• App-likeDeviceViewing:App-like devices that are
compliant with SNMP, MQTT, and Smart Discovery
• EventTable:The status of system can be reported via
event alarm
• AlarmSystem:E-mail alerts for the administrator via the
SMTP server
• DeviceProvisioning:Enabling BSP-360 to be congured
and upgraded at the same time
• SiteMap: Real-time site map of BSP-360 and IP cams on
the user-dened map to optimize energy deployment
• RemotePoEcontrol:Real-time remote PoE on/off to
reboot connected devices
• UserControl:Allowing on-demand account creation and
user-dened access policy
• Scalability:Free system upgrade and BSP-360 rmware
bulk upgrade capability
• MaximumScalability:1 site map, 512 nodes, 2048
managed IP cameras.
Network Management Characteristics
• Built-in DHCP Server
• SSL secure access
• Web-based GUI management interface
• SNMP v1, v2c, and v3 management
• Supports PLANET DDNS/Easy DDNS
Watch Over Energy Usage Level, and System and Device Events within
Minutes
The home page displays the statuses of system and device events to oversee
whether or not they are within the threshold set by the administrator. This can help
the administrator quickly know whether the system is operating stably or not. The
system event function offers the on-time event statistics table and you can lter the
event device with one touch. The event devices section shows which devices are
low in energy, not working properly and off the line. A graph of the current energy
usage level and the green power utilization shows the power traffic statuses of the
selected devices. Thus, it enables you to have a valuable information on the current
energy statuses and other situations at a glance. With that, the administrator can
immediately address whatever problem these devices may have.