Quick Guide
6
VESA Mounting
The NMS-1000V series is designed to be VESA-mounted as shown in the picture.
Just carefully place the LCD stand on the back of the controller and tighten the
given screws to secure the mounting.
Panel Mounting
There are eight holes located along the four sides of the NMS-1000V. Insert the
clamp from the four sides and tighten them with the nuts provided.
2.2 Product Features
z Network Devices Management
Dashboard: Providing the at-a-glance view of system, device summary,
trac,andPoEnetworkstatus.
Setup Wizard: Easy-to-use step-by-step guidance.