User's Manual

- 8 -
Rear Panel of N-WAP
Physical Interface & Button
Front Panel LED Indicators
Rear Panel Indicators
ÍNote
1. Machine LAN port default IP is http://192.168.1.254
. Press RESET
button on front panel over 5 seconds will reset the Access Point to
factory default value.
2. Using the power supply that is not the one included in package will
cause damage and void the warranty for this product.
LED Color State Descriptions
PWR
Blue
ON
Off
Access Point is power ON
Access Point is power Off
LAN
Yellow
ON
Flashing
Off
LAN is connected successfully
Data is transmitting
Ethernet not connected to PC
WPS
Red
ON
Off
WPS Active
WPS Not Active
Reset Button
Pressing over 5 seconds to reset to the factory default setting
LAN
RJ-45 connector, to maintain the existing network structure,
connected directly to the PC through straight CAT-5 cable