User's Manual

- 61 -

Chapter 8

Route Setup

Dynamic Route

Dynamic routing performs the same function as static routing except it is steadier. Dynamic routing

allows routing tables in routers to change as the possible routes change. There are several protocols

used to support dynamic routing including RIP and OSPF.

Enable Dynamic Route

Check the box to enable the Dynamic Route function.

NAT

Network Address Translation (NAT) selects to enable or disable

this function.

Transmit

Select to enable or disable RIP protocol for transmit.

Receive

Select to enable or disable RIP protocol for receive.

Static Route

To set static routers, enter the settings including route IP address, route mask, route gateway and the