User's Manual

- 50 -
1. Ensure you have set the security setting on Access Point (as Registrar).
2. Click the WPS button on Access Point (or the “Start PBC” button on the web interface of Access
Point) and the other device (supports PBC function) in 2 minutes.
3. Access Point (Registrar) would send SSID and security key to the other device (Enrollee) through
tunnel to connect.
4. If you see the wireless client in the list, WPS-PBC setting is successful.
- PIN (as register) setup step:
1. Fill the PIN code of the other device (as Enrollee that support WPS-PIN setting) into the “Client PIN
Number” of Access Point.
2. Click the “Start PIN” buttons on Access Point and the other device in 2 minutes.
3. If you see the wireless client in the list, WPS-PIN setting is successful.
- PIN (as Enrollee) setup step:
1. Fill the PIN code of Access Point into the other device (as Registrar).
2. Click the “Start PIN” buttons on Access Point and the other device in 2 minutes.
3. If you see the wireless client in the list, WPS-PIN setting is successful.